Maybe Craig can have one of his drivers take them to Davenport and I can take them to Indy.

Me too! But...the word daisy just seems a little....feminine? "A" for effort, though... Nick, I thought that I would just let the thing peter...

Unless the woofer is 10" or more, the woofer will run out of gas before the tweeter or mid. If SPL is required, then bigger speakers with a higher...

Quite a few of her songs have deep bass, good for exercising subs and woofers, and driving small midbass drivers crazy.

I'm in Napa, don't know anything about measuring either, but if you're out here you should at least try to check out Napa Valley as it's pretty close...

How about these? http://www.parts-express.com/pe/showdetl.cfm?partnumber=269-096 Easy access to the tweeter wiring, you could use a real XO in...

She once went so long between albums, I heard silly rumors that she died.

in a waveguide there shouldn't be any reason to cross that high. I duo wonder what the of acid will look like with a driver that size in say an 8"or...

hmmm hadn't really considered shipping. Though I wasn't expecting it to be cheap, $190 seems really steep for a round trip. Could you provide a zip...

There's more than 2 types... but yes I assume he means the bandpass vented loading. Also I find it weird that people just assumed he wanted this for...

Wow that vifa does look great. Small faceplate, good power handling and sensitivity too! Do you have any off axis measurements?

It will take more power to reach xmax. You're still thermally limited to 5w, but in music there isn't a lot of energy in the high frequencies. I...

I asked if this guy had ever built anything before. I haven't heard back yet. If its a first attempt, then I'll probably discourage it unless he is...

I was trying to think of a 6.5", 6X9, or 8" that might work in a 2-way with decent efficiency and bass extension but all I could think of was the...

Tuesday....twice as good as Monday......

I think this is the Vifa tweeter I mentioned. Not 100% sure though. I have a filter on it to try to flatten the lower end of the response, so this is...

GFC and Vifa. This was a crude x-over I made while troubleshooting a design that used a different woofer. (I swapped woofers.) The filter was not...

No matter how you perceive BFM's post, he is certainly right about the Lab 12 and what to look for in a bass guitar driver. That "someone"...

Welcome to the hood! I used to live in FF, and now l live about eight miles out. I don't know anything about speaker measuring, or much about...

PMed back! Sorry for the delay!

Classic Sony receiver gone to Rory! PMs updated... missed a few PMs from last week...

I don't think you ever got an answer to your original post:D. I was curious about the same question--If you use the one impedance value from the...

How about one of the budget wave guide designs? http://www.diysoundgroup.com/forum/index.php?board=20.0

Enya -- hmmm. I don't usually listen to that type of music, but I'll make an exception for this one. Very etherial. And sexy. I want to listen to...

That would concern me as well. Especially as it will limit your max SPL. And for HT SPL matters! However the mid is already pretty limited in terms...

Ahem, the toroid is not grounded to the chassis with the center tap. Here's a close up that shows the ground wire connected to the IEC socket. All...

I'm not designing anything. I never claimed I was. This is why I asked. I don't know how I could have been more clear in the first post. I found...

LOL, what more could I possibly ask for??? Thank you Neil! That will be very helpful.

The only thing that makes me worry about the shallow slopes is the tweeter doesn't have very extended response. It might be worth the extra $5 to go...

No, it's a subwoofer, not a bass guitar driver. Sensitivity is way too low. You need to look at electric bass drivers. Yes, but the range of...