SoundEasy crossover modeling Question

[erniecornick]

Will the CAD section of SoundEasy allow the modeling of an eliptical crossover as used in many speakers designed by Jon Marsh? Thanks, Ernie Cornick

[dlr]

> Will the CAD section of SoundEasy allow the
> modeling of an eliptical crossover as used
> in many speakers designed by Jon Marsh?
> Thanks, Ernie Cornick

You can model pretty much anything you want in SE. What you'll need to do for optimizing is to somehow create a target that mimics the acoustic response desired for each driver, import it as a target, set up the topology in SE, then optimize each driver to its target.

But since a Cauer filter is a topology used to achieve a response and not a response in and of itself, you'll have to decide where, how deep and of what Q you'll want the "dip" that the Cauer introduces.

Or do it by trial and error.

dlr

[erniecornick]

[douglockwood]

> Will the CAD section of SoundEasy allow the
> modeling of an eliptical crossover as used
> in many speakers designed by Jon Marsh?
> Thanks, Ernie Cornick
I have a working model of John's Modula MT series XO. So you can enter any arbetrary parts and evaluate.

Doug

[unknownuser]

(Originally posted by: AR)