PDA

View Full Version : Olive Update *PIC*


chadg
09-30-2005, 01:40 PM
http://chadgray.info/projectimages/SUB%20and%20Olives1.jpg

Provided Link: http://chadgray.info/projectdetail.cfm?ProjectID=54


I have been going through some major painting pains over the last week. If you want the details there are on my web site.

Here is a preliminary picture of the total Olive package. Note the martini glass speaker stands found on ebay.

Sub Details:
Driver is a Dayton 295-300 5.25" Sheilded
Amp is the Keiga 2.1 Media amp
Flare port is 7.5" long
F3 53Hz
Fb 36Hz
Vb .8 cu. ft.
shawn_a
09-30-2005, 01:45 PM
Those speakers are making me thirsty Chad. I'm glad you found those stands somewhere. It just wouldn't be right to use anything else IMO. Looking very slick. Now where's that bottle of gin......

shawn
chadg
09-30-2005, 01:52 PM
Provided Link: http://chadgray.info/


Thanks Shawn, The Sub was either going to be an Olive jar or Liquor bottle shape. I don't have time to get it done by DIY Dayton, but down the road i think it will be a necessity!
Adrian
09-30-2005, 02:13 PM
The way I see it, that sub should be in a sonotube with a taper at the top for a port. That can be your gin bottle. ;)
Good, job!
Adrian
> Thanks Shawn, The Sub was either going to be
> an Olive jar or Liquor bottle shape. I don't
> have time to get it done by DIY Dayton, but
> down the road i think it will be a
> necessity!
madrok
09-30-2005, 03:18 PM
Wow. Those look almost as good as mine...Of course, mine are already finished with gloss silver enamel. Try these drivers if you make more:

<A HREF="http://www.madisound.com/cgi-bin/index.cgi?cart_id=2144993.27135&pid=1757">http://www.madisound.com/cgi-bin/index.cgi?cart_id=2144993.27135&pid=1757</A>
Wolf
10-01-2005, 12:41 AM
> Thanks Shawn, The Sub was either going to be
> an Olive jar or Liquor bottle shape. I don't
> have time to get it done by DIY Dayton, but
> down the road i think it will be a
> necessity!

They COULD look like a liquor bottle.
W6 TB's,
Wolf
Wolf
10-01-2005, 12:42 AM
> Wow. Those look almost as good as mine...Of
> course, mine are already finished with gloss
> silver enamel. Try these drivers if you make
> more:

>
> <A HREF="http://www.madisound.com/cgi-bin/index.cgi?cart_id=2144993.27135&pid=1757">http://www.madisound.com/cgi-bin/index.cgi?cart_id=2144993.27135&pid=1757</A>
madrok
10-05-2005, 09:37 AM
BSC, 0.9mH and 5.6ohms. And a 0.2mH, 20 ohmns, 3uF notch I think. I could check.

(Sorry, I though I responded to this question long ago, but the reply is missing.)