PDA

View Full Version : Bitties and Incredibles.....



Wolf
10-02-2005, 01:09 AM
Watched it w/ them tonight. Compared to Marianas, running a pair in mono, they took ALMOST everything at -4dB, but NEVER bottomed! I also had the volume knob just south (8:30) of normal HT level (9:00). The rocket launch scene, with exhaust tubes being flushed with fire, was about the only thing they particularly didn't care for. I guess the extra mass is a GOOD thing after all.
IMPRESSED!
Wolf

natediggidy
10-02-2005, 08:55 AM
> Watched it w/ them tonight. Compared to
> Marianas, running a pair in mono, they took
> ALMOST everything at -4dB, but NEVER
> bottomed! I also had the volume knob just
> south (8:30) of normal HT level (9:00). The
> rocket launch scene, with exhaust tubes
> being flushed with fire, was about the only
> thing they particularly didn't care for. I
> guess the extra mass is a GOOD thing after
> all.
> IMPRESSED!
> Wolf

Thanks again for the tip on adding some mass. I used some wide-flat washers (2) I got at H-D.

Actually, the "Bitty-Boom" was an experiment to see if the Dayton 6.5"/8"PR combo would work.

Sooner or later I'll get around to building a box for it.

Next secret project... A two way with the Dayton 8"PR, Dayton DC160-8 and, well, that's the secret!