PDA

View Full Version : From Below: DIY Dayton Plans


jimgriffin
10-02-2005, 11:12 PM
Thanks for Darren's post down the page. I will be there and I plan to bring a new line array with a DEQX crossover. I'm going to set it up in my room (near the conference room I hope) on Friday afternoon. If a couple of guys feel like movers and shakers--well I mainly concerned about the moving part--I would appreciate some help on Friday afternoon starting at 3:00 pm. We'll set-up the room and get down to doing room corrections on the arrays. Then we get to listen.

It should be fun. Let me hear on the help part as I would be very grateful.

Thanks much,

Jim
shawn_a
10-02-2005, 11:54 PM
Hi Jim

I'm not sure of my plans on Friday yet but I should be available for the grunt work. For how long is kind of dependent on when Wolf gets down to Springboro but he will probably be able to meet up with me there. I look forward to meeting you and hearing your design.

shawn
Wolf
10-03-2005, 01:42 AM
jimgriffin
10-03-2005, 03:07 PM
> Hi Jim

> I'm not sure of my plans on Friday yet but I
> should be available for the grunt work. For
> how long is kind of dependent on when Wolf
> gets down to Springboro but he will probably
> be able to meet up with me there. I look
> forward to meeting you and hearing your
> design.

Shawn,

Thanks for the offer to help. I'll see you Friday. It should be fun.

Jim
Paul K.
10-03-2005, 08:48 PM
I plan to arrive around 3:00 or so and can probably give you some help, too, as long as it's not real heavy.
Paul K.

> Thanks for Darren's post down the page. I
> will be there and I plan to bring a new line
> array with a DEQX crossover. I'm going to
> set it up in my room (near the conference
> room I hope) on Friday afternoon. If a
> couple of guys feel like movers and
> shakers--well I mainly concerned about the
> moving part--I would appreciate some help on
> Friday afternoon starting at 3:00 pm. We'll
> set-up the room and get down to doing room
> corrections on the arrays. Then we get to
> listen.

> It should be fun. Let me hear on the help
> part as I would be very grateful.

> Thanks much,

> Jim
jimgriffin
10-03-2005, 08:54 PM
> I plan to arrive around 3:00 or so and can
> probably give you some help, too, as long as
> it's not real heavy.

Paul,

Gravity is a good thing getting large speakers out of the car. Mainly the work will be to move things around inside the room and make connections to the gear. Should not be too bad.

Thanks for the offer,

Jim