Dayton 8 MTM Project

[payj]

This will be my first project and the construction of the speaker is not well documented. The link is located <A HREF="http://www.wadsnet.com/~dtenney/dayton_8MTM.htm">http://www.wadsnet.com/~dtenney/dayton_8MTM.htm</A>

Can anyone help me figure this project out? I need to know how to construct the cabinet and also the speaker placement. I know allot of people built this project so I would appreciate the help. I would love some diagrams. Hook me up

[Jim P]

The cabinet dimensions are listed on the site with driver locations data. What kind of help do you need? If it is a diagram with actual dimensions, I could help you by drawing it in CAD and sending the file to you as a PDF. I need to know the material thickness you plan to use in order to create the drawing.

I received a lot of help from the contributors on this forum and want to contribute when I can. Send me an email if you want to take me up on my offer.
Good luck,
Jim

[drmorbius]

Provided Link: Plans in PDF format here (http://members.interfold.com/tedrobinson/images/D8.pdf)


The drawings are on Ted Robinson's site. A friend of mine and I built a couple of pair of the Dayton 8's. We love them. They were out first project also.

<A HREF="http://members.interfold.com/tedrobinson/images/D8.pdf">http://members.interfold.com/tedrobinson/images/D8.pdf</A>

[drmorbius]

By the way, Ted Robinson's site doesn't work too well in FireFox. I can view it fine in Internet Explorer though.

<A HREF="http://members.interfold.com/tedrobinson/">http://members.interfold.com/tedrobinson/</A>

> The drawings are on Ted Robinson's site. A
> friend of mine and I built a couple of pair
> of the Dayton 8's. We love them. They were
> out first project also.

>
> <A HREF="http://members.interfold.com/tedrobinson/images/D8.pdf">http://members.interfold.com/tedrobinson/images/D8.pdf</A>

[payj]

Wow thank you guys so much I didn't know diagrams for this project existed. Now I can start the project with more confidence. Everyone on the board seems to be very helpful and responsive. Thank you for the welcome and help. I will probably ask more questions as I start the project. The only thing holding me back now is that the tweeters are out of stock.

[tomk]

Do you find that they handle enough power without bottoming out? Any reason why you didn't use the series II dayton 8" aside from the cost factor? I never see to projects on here with the series II speakers aside from the angel fires in the project showcase.