PDA

View Full Version : RSS390HF project, done.... for now *PIC*



JustinG
07-13-2007, 12:00 AM
http://i189.photobucket.com/albums/z164/MEatRHIT/Sub%20Project/DSC00070.jpg

Provided Link: Other pictures here... (http://s189.photobucket.com/albums/z164/MEatRHIT/Sub%20Project/)


As I mentioned in an earlier post I learned a lot about box building on this (my first) project: what to do, what not to do (mostly the latter). Have a few places to touch up for now, but some time I really need to smooth the waves in my Bondo down... but it still sounds amazing for the time being. OOO E-X-C-U-R-S-I-O-N.

brianwalter
07-13-2007, 08:57 AM
Looking good. The box looks to be well braced and should be quite rigid, but you need to pre-drill for your screws. Ideally, you should drill a pilot hole for the screw, recess for the head and at least a partial clearance hole for the outer board. You can get a single drill bit that does this for you, and if you only have one drill, get one of those quick change adapters so you can quickly change back and forth between the drill and screw driver.

Otherwise, you did a really good job and so long as it sounds great, that's the most important part.

Brian Walter