Presenting the "3CR-Ti"! *PIC*

[Wolf]

http://i18.photobucket.com/albums/b117/wolf_teeth_speaker/3CR/3CR-TI_1.jpg


This is the 2nd gen of the 3CR cabs. Thus far I know I'll need BSC and a notch. The treble knob is tweaked down a smidge, and the bass is up a smidge, and it balances out about right. I'll be calculating up components for this. The bass is not bloated or tubby. It's extended as it should be, but a little shy on level. Mids are indeed very respectable. Much better than the first-driver rendition. I'll retain the switchable filter in the design so a w/wo can be listened to. I'm glad I upgraded! There are about 5-6 TB drivers that can all be used in this box.
Enjoy the pic...
Wolf

[nick29498141]

Looks bueno.

That's the 4" right?

The 3"s I nabbed are numbers #1, #2 (Matched pair! :) ) of these....... <A HREF="http://www.tb-speaker.com/detail/1230_04/w3-1319sa.htm">http://www.tb-speaker.com/detail/1230_04/w3-1319sa.htm</A>

Bamboo cone, solid phase plug, good FR.

I'll see what I'll do... I think I'll make them to go with the Mac as computer speaks, running full range with a passivle/active sub using some S8P (Hi-Vi) that I picked up last year. To jog the memory: Soft trated foam surround, stamped basket, soft dustcap, poly cone, 3.5? mm xmax, way too many logos..

NK

[Wolf]

> Looks bueno.

Thanks. Recycled cabs.

> That's the 4" right?

Yep! Darren sold them to me Saturday.

> The 3"s I nabbed are numbers #1, #2
> (Matched pair! :) ) of these.......
> <A HREF="http://www.tb-speaker.com/detail/1230_04/w3-1319sa.htm">http://www.tb-speaker.com/detail/1230_04/w3-1319sa.htm</A>
> Bamboo cone, solid phase plug, good FR.

I'm telling ya, you'll want a tweeter. ND16 will be fine.

> I'll see what I'll do... I think I'll make
> them to go with the Mac as computer speaks,
> running full range with a passivle/active
> sub using some S8P (Hi-Vi) that I picked up
> last year. To jog the memory: Soft trated
> foam surround, stamped basket, soft dustcap,
> poly cone, 3.5? mm xmax, way too many
> logos..

Watcha doin' with the W8-740AL? REL-clone?
Later,
Wolf