FS: CNC cut baffles, spekare boxes, parts, ect

[nikbrewer]

Ok, i though i would post his up here to se if there is any interest. I am a new forum member and new to DIY home audio. However, i have done car audio for a number of years, and actually produce an sell car speaker boxes. Currently i have to purchase cnc from my employeer at a fixed hourly rate. lately, i have not been beeing enough orders to fill a whole hour, so i am wasting money.

What i am offering if baffles, full speaker boxes ect. They are cut on a cnc machine and then mailed to you. I am located in oklaoma city if you wanted to pick them up.

Im not looking to make a profit, just cover the cost, as i need filler so i dont lose money running the cnc.

Prices would be as follows

6$ per square foot of 3/4" mdf, so a 12" x 12" x 12" sub box wout be 6 square feet, or 36$ plus shipping. I will machine the speaker cutouts, ports, terminals boxes, and dato the boxes.

There is a 20% discount if you can just email me a dxf with all the parts you need layed out in a 4' x 8' rectangle, with notes showing what you want.

I cut one friday a month, so turn around could be 1-4 weeks depending.

Like i said, not looking to make money, just help out hobbiest and fill my full hour a paid for machine time

[Steve Henry]

Do you have access/ability to CNC 1" baffles?

[nikbrewer]

i could do it fron 2 layers of 1/2" mdf glued up, or if you need a lot, i could order in a sheet of 1". If anyoen cares, i do have access to a lrage amount of 2 1/2" thick mdf

[Steve Henry]

I love your idea & being in the DFW area, shipping won't hurt that bad. See PM for my request.

[philiparcario]

i could do it fron 2 layers of 1/2" mdf glued up, or if you need a lot, i could order in a sheet of 1". If anyoen cares, i do have access to a lrage amount of 2 1/2" thick mdf

I need rings 182mm on the outside and 155mm on the inside.
They need to be about 8 inches high.
so six of the 2.5 inch thick mdf pieces cut into 6 rings that are 2.5 inches tall. work for me. I can do the glue up.

the rings would be 7.165 od and 6.102 inch id and 2.500 inch tall. 6 of them would make 2 cylinders of about 7.5 inches tall for me. I can send you a paypal. pm me

phil

[nikbrewer]

would you accept it all from 3/4" mdf, ill do the glue up if you want. at over 300 lbs a sheet, is barely work moving the thick stuff for a few rings

[philiparcario]

would you accept it all from 3/4" mdf, ill do the glue up if you want. at over 300 lbs a sheet, is barely work moving the thick stuff for a few rings

sure 3/4 works. I can do the glue up it will be easy for me. phil. it is easy to do the gluing cutting the rings is the hard work. what would it come to?

[nikbrewer]

i sent you a pm. price is the same, i was just going to glue up for free to help you out

[nikbrewer]

ill be cutting on friday, so if anyone needs anything, let me know before then

[bmaupin]

I'll definitely give you an order soon. I have a couple pairs of PE cabinets with removable baffles and would like to try some other driver combinations. Do you know of any freeware that will create a dfx file? Otherwise I can send pictures or web pages created with Visio.

What is your zip code so I can figure out what shipping will cost.

Thanks, Brad

[nikbrewer]

just seach for free cad sofware. one i use at home is acad9 i think is the name, it is a autocad clone, uses same commands, ect.

zip is 73003

[nikbrewer]

if anyone is still interested, i need specs by tomorrow night as i cut arounf 10am ( we work half days friday)

[Steve Henry]

PM sent.

[nikbrewer]

WELL, its getting close to last call for cnc machining. i hope to machine again in 2-3 weeks. I have half a 4 x 8 sheet empty at the moment.