johnnyrichards
08-20-2009, 02:44 PM
Infinity CSW-10 (http://www.infinitysystems.com/home/products/product_detail.aspx?prod=CSW10BK&CheckProduct=Y&Language=ENG&Country=US&Region=USA) 650 Watt 10" compact 10" subwoofer.
I'll let this one go for $300. It weighs over 50 pounds! I am using it as my computer subwoofer now. No shipping on this one! I will deliver a reasonable distance though.
This is the driver used in this monster:
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/InfSubFront2.jpg
Six (6) Realistic 6.5" polypropylene woofers. Catalog 40-1011A. Very smooth sounding woofers. Shawn A measured them and I have an FRD and ZMA file for them. Five of the six are in great shape, the sixth one has the paper gasket cut off but functionally it is in good shape. These are way better woofers than the name implies. $75 shipped CONUS for all six of them.
Two (2) Dayton Audio ND20FB 3/4" tweeters. These are the rear mount, They sound good, but the mounting is a PITA so I am going to sell them. I like the front mount ones better. These were crossed over 3200 Hz 4th order LR and never driven very loud. $12 shipped CONUS for the pair. Sold
One (1) 12" OEM Infinity driver. This was used in their TSS1200 powered subwoofer. It is built like a tank and uses their CMMD cone material. That is fancy talk for anodized aluminum. I have full T/s parameters for it. The bucking magnet has been knocked off the back. I did that to raise the "Q" to use it in a free-air application in my car but that project never materialized. It has an Fs of 26 hz, a "Q" of 0.66 and the Vas is 4.5 cubic feet. It would make a decent free-air/infinite baffle subwoofer. It has healthy Xmax (~12mm), a 2" voice coil and a big spider. Putting a bucking magnet back on it would probably lower "Q" but Fs might rise. $60 shipped CONUS.
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/TSS1200Driver.jpg
One pair of 8" Infinity Reference car audio subwoofers. These are dandy little guys. Technical (http://manuals.harman.com/INF/CAR/Boxes%20and%20Parameters/850W.pdf) specs. I measured them pretty close to Infinity's claims. If they were not so ugly, they would make really nice compact powered subwoofers for home theater. $100 shipped CONUS for the pair.
http://techtalk.parts-express.com/picture.php?albumid=209&pictureid=1689
One (1) Jensen KA-5 five channel amplifier. I have two of them, this is the one which has an issue. The four channel side works flawlessly, sounds great. The mono block side is no longer capable of driving less than a 4 ohm load. I don't know what I did, but it will drive a 4 ohm load all day but drop to 2 ohm (it is rated for one ohm!) and it shuts off after a few seconds. If you just need a 4 ohm mono, than this is a really, really good amplifier. It is fused at 80 amps! 50wx4 plus 150 watts mono. $50 shipped CONUS.
http://ampguts.realmofexcursion.com/Jensen_KA5/outside1.jpg
ATI Radeon HD2400 PCIecpress video card. Fanless! 512 megabytes of DDR2 RAM. Good solid card for HTPC use. $30 shipped. (Pete Rose is not for sale, that is my little brothers birthday present)
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/radeon.jpg
Tang Band 5.25" W8-1138SG/Dayton Audio SA-25 25 watt plate amp. Both used but is perfect working condition. $45 shipped CONUS for both. This is a sad one to see go, as I really like how this little combo sounds. Sold
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/tangbanddayton.jpg
Coustic XM6 3-way electronic crossover. Very lightly used, a lot of options. $40 shipped CONUS.
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/crossoverMedium.jpg
I have some other stuff too, as I find it I will post it. I know I have a pair of those Peerless 2" cone tweeters, two pair of those 2.5" cone tweeter buyouts, two pair of the matching midranges, a pair of 15" KLH OEM woofers that would make a neat, cheap OB/H frame subwoofer, and some other miscellaneous speakers.
None of this stuff is boxed up and when it ships, I will probably ship the larger stuff parcel post. So please be patient with me :)
Paypal is my preferred, but I can do money orders as well. Don't be afraid to shoot me offers :)
Just for kicks a picture of my daughter and I in the Badlands of South Dakota this summer:
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/badlandsMedium.jpg
I'll let this one go for $300. It weighs over 50 pounds! I am using it as my computer subwoofer now. No shipping on this one! I will deliver a reasonable distance though.
This is the driver used in this monster:
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/InfSubFront2.jpg
Six (6) Realistic 6.5" polypropylene woofers. Catalog 40-1011A. Very smooth sounding woofers. Shawn A measured them and I have an FRD and ZMA file for them. Five of the six are in great shape, the sixth one has the paper gasket cut off but functionally it is in good shape. These are way better woofers than the name implies. $75 shipped CONUS for all six of them.
Two (2) Dayton Audio ND20FB 3/4" tweeters. These are the rear mount, They sound good, but the mounting is a PITA so I am going to sell them. I like the front mount ones better. These were crossed over 3200 Hz 4th order LR and never driven very loud. $12 shipped CONUS for the pair. Sold
One (1) 12" OEM Infinity driver. This was used in their TSS1200 powered subwoofer. It is built like a tank and uses their CMMD cone material. That is fancy talk for anodized aluminum. I have full T/s parameters for it. The bucking magnet has been knocked off the back. I did that to raise the "Q" to use it in a free-air application in my car but that project never materialized. It has an Fs of 26 hz, a "Q" of 0.66 and the Vas is 4.5 cubic feet. It would make a decent free-air/infinite baffle subwoofer. It has healthy Xmax (~12mm), a 2" voice coil and a big spider. Putting a bucking magnet back on it would probably lower "Q" but Fs might rise. $60 shipped CONUS.
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/TSS1200Driver.jpg
One pair of 8" Infinity Reference car audio subwoofers. These are dandy little guys. Technical (http://manuals.harman.com/INF/CAR/Boxes%20and%20Parameters/850W.pdf) specs. I measured them pretty close to Infinity's claims. If they were not so ugly, they would make really nice compact powered subwoofers for home theater. $100 shipped CONUS for the pair.
http://techtalk.parts-express.com/picture.php?albumid=209&pictureid=1689
One (1) Jensen KA-5 five channel amplifier. I have two of them, this is the one which has an issue. The four channel side works flawlessly, sounds great. The mono block side is no longer capable of driving less than a 4 ohm load. I don't know what I did, but it will drive a 4 ohm load all day but drop to 2 ohm (it is rated for one ohm!) and it shuts off after a few seconds. If you just need a 4 ohm mono, than this is a really, really good amplifier. It is fused at 80 amps! 50wx4 plus 150 watts mono. $50 shipped CONUS.
http://ampguts.realmofexcursion.com/Jensen_KA5/outside1.jpg
ATI Radeon HD2400 PCIecpress video card. Fanless! 512 megabytes of DDR2 RAM. Good solid card for HTPC use. $30 shipped. (Pete Rose is not for sale, that is my little brothers birthday present)
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/radeon.jpg
Tang Band 5.25" W8-1138SG/Dayton Audio SA-25 25 watt plate amp. Both used but is perfect working condition. $45 shipped CONUS for both. This is a sad one to see go, as I really like how this little combo sounds. Sold
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/tangbanddayton.jpg
Coustic XM6 3-way electronic crossover. Very lightly used, a lot of options. $40 shipped CONUS.
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/crossoverMedium.jpg
I have some other stuff too, as I find it I will post it. I know I have a pair of those Peerless 2" cone tweeters, two pair of those 2.5" cone tweeter buyouts, two pair of the matching midranges, a pair of 15" KLH OEM woofers that would make a neat, cheap OB/H frame subwoofer, and some other miscellaneous speakers.
None of this stuff is boxed up and when it ships, I will probably ship the larger stuff parcel post. So please be patient with me :)
Paypal is my preferred, but I can do money orders as well. Don't be afraid to shoot me offers :)
Just for kicks a picture of my daughter and I in the Badlands of South Dakota this summer:
http://i106.photobucket.com/albums/m273/JohnnyDingo_2006/badlandsMedium.jpg