View Full Version : Has anyone used this MCM 8"?
04-14-2011, 08:25 PM
it looks interesting and is on sale although the 1.5mm xmas would require multiples for any real air movement (ala DA175).
04-14-2011, 08:57 PM
What MCM 8" model?
04-14-2011, 10:24 PM
04-14-2011, 11:16 PM
I personally wouldn't pay $42 for a woofer with a steel frame AND a whopping 1.5mm Xmax.
04-15-2011, 09:50 AM
maybe not but it is on for $25 right now.
04-15-2011, 09:56 AM
Played around with these on bass box awhile back and after reading review's maybe build some for your cousin first or move on to something else:D
04-15-2011, 11:51 AM
Unless there's some particular aspect about it that's good, why bother spending your time working with that driver when you could pay a little more for the RS225...
But of course, the counter-argument is when does that stop, if there's always a better option for "just a little more...".
It would be nice to see a measurement. If you can measure it yourself and find such activity enjoyable, then it seems reasonably priced and might be a fun project.
I'd be more inclined to want to try the cast frame version, partially because I don't care for the look of that extra ring protruding between the surround and the stamped metal frame.
04-15-2011, 05:08 PM
...is on sale although the 1.5mm xmas ...
Got that same sales notification, but rejected it because it's too displacement limited.
Way back when I first started building speakers I usedthem for the under $150 contest. The frame is really cheap stamped metal. There was a hump around 1200 that I never tamed and I eventually gave the drivers away and put some really nice cheap Peerless 8" drivers in the cabinets. They are in my daughter's room and still sound great.
04-17-2011, 05:20 AM
I'm messing with some 6.5 inch MCM speakers right now, and they're measurements on WT3 are way higher than the published spec. Buyer beware.;)
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.