1

So I've got my Diy cnc pretty much running and made my first tweeter cutout yesterday, it was just out of pink foam installation and all was going perfectly until my Z axis hit a "stop" that it wasn't meant to. I had screwed my dremel to my z axis, till I get a better spindle setup, and the screws were too long would get stuck on a non-moving part, well luckily my power supply is only about 2/3 the power it should be so my stepper would just loose steps instead of just self-destructing(there ...

OK, so my larger project is sounding good, I need to get measurements up, but, in-depth details and pictures will have to wait(as this is a planed commercial product) anyway After all the hard work of making the proto enclosure and making a mold of it, I found it is not square, looking at it you can't tell and it doesn't effect the sound, it good enough to design the crossovers and such but it won't do for "Real" product, so because of this and designs of the same process, will also need ...