Announcement

Collapse
No announcement yet.

Calibration files

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • skatz
    started a topic Calibration files

    Calibration files

    Can anyone tell me where to look for the mic calibration files? The instructions say what to download but not where to find it. Tech support was closed when I tried to call, and searches on PE's site and Dayton Audio site didn't get me anywhere.

  • skatz
    replied
    Thanks again.

    Leave a comment:


  • dcibel
    replied
    The Omnimic software only works with the Omnimic. You may use the Omnimic with other software however.

    Leave a comment:


  • skatz
    replied
    It turns out that I have both the OmniMic and EMM-6 mics available, which should I use for OmniMic system?

    Leave a comment:


  • skatz
    replied
    Thank you sir!

    Leave a comment:


  • dcibel
    replied
    They're available on the product page at Dayton's website. Just enter your serial number.

    EMM-6:
    http://www.daytonaudio.com/index.php...icrophone.html

    UMM-6:
    http://www.daytonaudio.com/index.php...icrophone.html

    Omnimic:
    http://www.daytonaudio.com/index.php...nt-system.html

    Leave a comment:

Working...
X