Announcement

Collapse
No announcement yet.

Omni Mic for recording guitar?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • YosuaNunez
    replied
    Que genial, me encanta este tema, son unos genios

    Leave a comment:


  • Kasey01
    replied
    If any single microphone placement could be considered a “standard,” it might be a small-diaphragm condenser mic with a cardioid pattern, placed about six inches from the instrument and pointed at the lower bout. The cardioid vidmate pattern is more sensitive in front of the microphone with greater rejection of sounds from the sides (and even more rejection from the rear of the mic). Typically, the mic points about halfway between the soundhole and the point where the neck joins the body, a couple of inches below the neck.
    Last edited by Kasey01; 05-08-2020, 06:13 AM.

    Leave a comment:


  • dcibel
    replied
    An omnidirectional pattern is not ideal for instrument recording. You'll capture all the echo/reverb of the recording room as well. Use a condenser or dynamic mic with cardioid pattern.

    Leave a comment:


  • exojam
    started a topic Omni Mic for recording guitar?

    Omni Mic for recording guitar?

    I am just wonder by chance if anyone has ever used the OmniMic as a stand-alone mic with another program for recording guitar?

    Bill, if you see this can you let me know if you think the mic could be used for such recordings?
Working...
X