Announcement

Collapse
No announcement yet.

Fast sjne sweep only indcated

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fast sjne sweep only indcated

    Hi I have just started using omnimic, and it is indicating that I can only use fast sine sweep. Anyone know why that is?
    Derek

  • #2
    For basic frequency response, fast sine or pseudo noise can be used, just select the radio button in the top left. pseudo noise is less annoying, but rolls off the top end, if you want accuracy the sine sweep must be used.
    "I just use off the shelf textbook filters designed for a resistor of 8 ohms with
    exactly a Fc 3K for both drivers, anybody can do it." -Xmax

    Comment


    • #3
      My problem is that I want to use slow sweep for distortion measurements and I can't see how to.

      Comment


      • #4
        It's track 3.
        "I just use off the shelf textbook filters designed for a resistor of 8 ohms with
        exactly a Fc 3K for both drivers, anybody can do it." -Xmax

        Comment

        Working...
        X