Announcement

Collapse
No announcement yet.

power is being delivered to the driver?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • gowa
    replied
    Re: power is being delivered to the driver?

    That looks handy, thanks.

    Leave a comment:


  • Derekj
    replied
    Re: power is being delivered to the driver?

    I bought one of these for using at home - it should do the trick and not expensive at all

    http://www.canadiantire.ca/en/pdp/ma...l#.VhrUR_lVhBc

    Leave a comment:


  • Derekj
    replied
    Re: power is being delivered to the driver?

    Originally posted by gowa View Post
    Thanks, can you suggest one that's good but inexpensive?
    Not sure how else to do it - that's the way I was told how to do it.

    Leave a comment:


  • gowa
    replied
    Re: power is being delivered to the driver?

    Thanks, can you suggest one that's good but inexpensive?

    Leave a comment:


  • Derekj
    replied
    Re: power is being delivered to the driver?

    You will want to use track 18 or 19 (50hz tone) and then measure your voltage output from the amplifier (looking for 2.83 volts) using a multimeter on the ac volt setting. This will give you your 1 watt output so you can measure the efficiency of your speaker. Remember to take the measurement with the speaker unhooked.

    PS - read through the help files - there is so much info in there to help you learn how to use the OmniMic!

    Leave a comment:


  • gowa
    started a topic power is being delivered to the driver?

    power is being delivered to the driver?

    I just purchased OmniMic V2.
    . put the yellow CD into my CD player.
    . chose track 9
    . placed the mic at 1 meter on axis
    I have no way to know how much power is being delivered to the driver.
Working...
X