Announcement

Collapse
No announcement yet.

My take on Dragon Foals CNC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mikec
    replied
    I've got a pair of "Dragon Foals" built by Wolf himself.

    Incredible sound!!!!

    Leave a comment:


  • Wolf
    replied
    I'll try and wayback it first...
    Wolf

    Leave a comment:


  • Jimmys91
    replied
    Yes originally i looked for the build and could not find it, i did not know it was due to updates just thought i could not find it. I ordered 6 of the drivers as i'm going to build my step son a Ipod/Alexa speaker to start with. I will then play with a set of book shelf / point source after and later a sound bar. If you could find any additional information such as the size of the box and driver placement i would be most appreciative. I have 6 drivers and enough crossovers to build 3 to your specs i could find and a few extra odds and ends to play with sound bar.

    Leave a comment:


  • Wolf
    replied
    Volume is not the only consideration. The way the edges interact with the response due to distance is also a factor. I can look up the dimensions via wayback, or see if my write-up disc has a backup on it. Are you lining the port? It needs it. You can proceed as you like, but changing the design will throw reason of dissatisfaction back on your part if you are unhappy with the results. This is why I was giving you info in the blog replies. The write-up was in full awhile back, but due to forum updates and revisions has been truncated, omitting valuable information. It is not all there.

    Later,
    Wolf

    Leave a comment:


  • Jimmys91
    replied
    internal it will be 6" x 6" x 5.5" for a total of 3.1 liters correct?

    Leave a comment:


  • Wolf
    replied
    Are you changing the dimensions?
    Wolf

    Leave a comment:


  • Jimmys91
    started a topic My take on Dragon Foals CNC

    My take on Dragon Foals CNC

    Starting my project as a Christmas present for stepson. Going to cut the box on my CNC out of plywood with a slot port.
Working...
X