Announcement

Collapse
No announcement yet.

Continuum build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • djg
    replied
    The screw on baffle and rear panel require cleats to screw to. The particular location of the screws is leading me to a 2 layer construction of the basic top sides and bottom, mostly so I don't have to do extensive routing of hateful MDF. It may get complicated (for my skill level). You may have to settle for pictures.

    A more traditional solid wood look Continuum would be easier. Tyger23's build.


    Click image for larger version  Name:	tyger's continuum.jpg Views:	0 Size:	132.3 KB ID:	1444364
    Last edited by djg; 06-18-2020, 10:54 AM.

    Leave a comment:


  • ceiol
    replied
    looking good!

    let me know if you want to build an extra flat-pack / knock-down set of enclosures -- I will happily pay for them + labor + shipping!

    I have all the parts for a set of continuums but not the expertise for a pretty build like that. I'm getting pretty good at veneer work, however.



    Leave a comment:


  • djg
    replied
    My plan is to mimic this look. Click image for larger version

Name:	harbeth.jpg
Views:	1257
Size:	85.5 KB
ID:	1444253

    Leave a comment:


  • djg
    started a topic Continuum build

    Continuum build

    The beginnings, NOS tweeters, PSA cherry veneer, solid cherry trim, baffles and rear panels, 1/4" and 1/2" MDF. William Schneider I am not.


    Click image for larger version

Name:	IMG_0017.JPG
Views:	1278
Size:	687.1 KB
ID:	1444248 Click image for larger version

Name:	IMG_0018.JPG
Views:	1246
Size:	925.3 KB
ID:	1444249
Working...
X