Announcement

Collapse
No announcement yet.

Dayton Audio world domination with crossover components! :)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dayton Audio world domination with crossover components! :)

    Dayton has some new crossover bits, I see:

    Air Coil:
    http://www.parts-express.com/dayton-...-coil--257-852

    Copper Foil:
    http://www.parts-express.com/dayton-...-coil--257-624

    I-Core:
    http://www.parts-express.com/dayton-...-coil--257-580

    Lots and lots of values for each. NICE!!!!!

    TomZ
    Zarbo Audio Projects Youtube Channel: https://www.youtube.com/channel/UCEZ...aFQSTl6NdOwgxQ * 320-641 Amp Review Youtube: https://youtu.be/ugjfcI5p6m0 *Veneering curves, seams, using heat-lock iron on method *Trimming veneer & tips *Curved Sides glue-up video
    *Part 2 *Gluing multiple curved laminations of HDF

  • #2
    Interesting. Seems to be good prices too.
    -Kerry

    Comment


    • #3
      Yikes!

      Their #18 solid cores are (approx.) 60% the co$t of the ERSE "I-Core"s.
      The 14 gauge air cores are "almost" the same as Jantzen's #15s (maybe about +10% higher - but DCR is about -5% less).
      And their #18s are about 2/3rds the price of the Jantzen's (SOME are cheaper than Jantzen's #20s!).
      Last edited by Chris Roemer; 01-15-2017, 09:52 PM.

      Comment


      • #4
        Great prices. I wondered when they would start doing inductors. Seems like low hanging fruit. Nice job PE.

        Dan
        _____________________________
        Tall Boys
        NRNP Computer Sub
        The Boxers
        The Hurricanes
        The Baronettes
        Conneccentric
        UX3

        Comment


        • #5
          Excellent job, PE.
          "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche

          http://www.diy-ny.com/

          Comment


          • #6
            Cool! I wonder if they'll be adding 20 gauge air coils too. This is a good move, and the prices are very competitive. I've been buying most of my XO parts directly from Erse. Its hard to justify not buying from them when I'm saving anywhere from $20- $40 on XO parts for one pair of speakers. I should be able to get all my XO parts from PE now and feel good about the cost. Thanks PE!

            Comment


            • #7
              Saw these at CES, looked like really nice product! Javad
              --
              Javad Shadzi
              Bay Area, CA

              2-Channel Stereo system in the works with Adcom components and 4-way towers

              Comment


              • #8
                Those look great!

                Comment


                • #9
                  Originally posted by Jeff F. View Post
                  Cool! I wonder if they'll be adding 20 gauge air coils too. This is a good move, and the prices are very competitive. I've been buying most of my XO parts directly from Erse. Its hard to justify not buying from them when I'm saving anywhere from $20- $40 on XO parts for one pair of speakers. I should be able to get all my XO parts from PE now and feel good about the cost. Thanks PE!
                  I have been doing the same. This is a game changer.
                  "A dirty shop is an unsafe shop, if you injure yourself in a clean shop you are just stupid" - Coach Kupchinsky

                  The Madeleine
                  The Roxster
                  Swopes 5.0
                  Acoustic Panels
                  Living Room Make Over

                  Comment


                  • #10
                    The pricing is very attractive, glad to see these

                    Comment


                    • #11
                      Nice not to have to hunt around for better prices.
                      Kenny

                      http://www.diy-ny.com/
                      DIY NY/NJ 2014 https://www.youtube.com/watch?v=FGwA...ature=youtu.be
                      Man does not live by measurements alone, a little music helps.

                      Comment


                      • #12
                        I hope Solen picks up the I-core line, so I can finally have a good Canadian source for I-core inductors. Maybe a conflict of interest with Solen's own product line, but they only make air core.
                        "I just use off the shelf textbook filters designed for a resistor of 8 ohms with
                        exactly a Fc 3K for both drivers, anybody can do it." -Xmax

                        Comment


                        • #13
                          Originally posted by JavadS View Post
                          Saw these at CES, looked like really nice product! Javad
                          So what else did you see at their booth?
                          My "No-Name" CC Speaker
                          Kerry's "Silverbacks"
                          Ben's Synchaeta's for Mom
                          The Archers
                          Rick's "db" Desktop CBT Arrays
                          The Gandalf's

                          Comment


                          • #14
                            Originally posted by Kevin K.
                            So what else did you see at their booth?
                            A few more really cool things but they didn't want anything public quite yet, will post more when they're cool with it =)
                            --
                            Javad Shadzi
                            Bay Area, CA

                            2-Channel Stereo system in the works with Adcom components and 4-way towers

                            Comment


                            • #15
                              Where are the passive radiators? :P
                              "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche

                              http://www.diy-ny.com/

                              Comment

                              Working...
                              X