Announcement

Collapse
No announcement yet.

Cool find at Target

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Whaddya guys think?
    Builds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :p

    Comment


    • #47
      Great idea. Maybe instead of just gluing a side together, you can construct a brace to hold the backs, so both drivers and be on the same plane. The tweeter can be on top in a TMM arrangement.

      Comment


      • #48
        Originally posted by ronk View Post
        ... so both drivers and be on the same plane...
        yup

        "Not a Speaker Designer - Not even on the Internet"
        "If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter."

        Comment


        • #49
          Yeah a spine would be good. I just bought two of them. I am going to use an external port on them and use ND65-8's with a slight contour filter.

          Comment


          • #50
            Originally posted by ronk View Post
            Great idea. Maybe instead of just gluing a side together, you can construct a brace to hold the backs, so both drivers and be on the same plane. The tweeter can be on top in a TMM arrangement.
            A flat, thinner board of almost any shape can be used against the backs (glued or screwed). The bottom of the board would be a wide as needed to stabilize the speaker side to side. The bottom edge's of the front of the speaker and the board would stabilize the speaker front to back. And the distance between the cups can be chosen to facilitate the tweeter mounting.

            Septagon.jpg

            Comment


            • #51
              Love it. The "Flower Pot" idea is so cool. Using one as a base and for stationary/writing utensils and then port/support post running up to main enclosure..... I hope it happens.
              Builds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :p

              Comment


              • #52
                Something like this?

                Comment


                • #53
                  Originally posted by Millstonemike View Post
                  A flat, thinner board of almost any shape can be used against the backs (glued or screwed). The bottom of the board would be a wide as needed to stabilize the speaker side to side. The bottom edge's of the front of the speaker and the board would stabilize the speaker front to back. And the distance between the cups can be chosen to facilitate the tweeter mounting.

                  [ATTACH=CONFIG]n1324288[/ATTACH]

                  This is sweet

                  Comment


                  • #54
                    I just got back from Target. No more wooden Septagon containers. But they do have the large wooden waste basket that can be used for the flower pot.

                    Comment


                    • #55
                      Cool find Joey!
                      --
                      Javad Shadzi
                      Bay Area, CA

                      2-Channel Stereo system in the works with Adcom components and 4-way towers

                      Comment

                      Working...
                      X