Just a few thoughts...
1- could you slot-port out the front sides to remove the port issues?
2- could you place a pair of side-ways traps flanking the tweeter to eliminate their issues?
3- would fluid flow/diffraction be an issue for the woofers' cavity resonances? I recall Bill's entry to MWAF one year as having sculpted entries into the horn, and an arcing slot exit right at the horn entrance, and those were almost to the mid-point in the bottom and top horn flare panels whilst being at the extremes in horizontal placement; ei- basically 'at the groove' or 90 degree bend in the horn.
Of course- I'm just speculating and interested to what you find out...
Wolf
1- could you slot-port out the front sides to remove the port issues?
2- could you place a pair of side-ways traps flanking the tweeter to eliminate their issues?
3- would fluid flow/diffraction be an issue for the woofers' cavity resonances? I recall Bill's entry to MWAF one year as having sculpted entries into the horn, and an arcing slot exit right at the horn entrance, and those were almost to the mid-point in the bottom and top horn flare panels whilst being at the extremes in horizontal placement; ei- basically 'at the groove' or 90 degree bend in the horn.
Of course- I'm just speculating and interested to what you find out...
Wolf
Comment