Announcement

Collapse
No announcement yet.

Small but I think a good upgrade for my mini cnc shop

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Small but I think a good upgrade for my mini cnc shop

    So I built myself an acrylic enclosure to hold my desktop CNC. It has a port on top that goes to my dust collector. It also really cuts down on the noise and reduces over dust. Also if a part comes flying off give some safely.

    What am I cutting? I'm cutting an acrylic mirror ring to go around my speaker driver. I wanted to see if it would spruce of the rather generic look of the driver I'm using. I really want to try aluminum, but I don't think my mini desktop will handle it. It does well with MFF and plastic though

    P.S. Still looking for a buyer on my WT3 woofer tester. I upgraded to the DATS2. $40 for anyone that wants it. I think it will be around $5-$6 dollars to ship. Let met know.
    On the cheap diy. That is my motto - www.hifiposse.com
Working...
X