Announcement

Collapse
No announcement yet.

How to make an Audi sandwich, the hard way.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Originally posted by wogg View Post
    It's also darn impossible to deviate from Google's stated arrival time by much, darn thing is constantly figuring out what is going on and probably even how I'm driving. It was fun back at the beginning of the GPS nav thing to take the ETA as a challenge and beat it.
    Let's just say when you have 600hp, all wheel drive with a torque sensing center and vectoring rear diff, and can pull 1.5g lateral, the google algorithm is quite easy to beat ;) Javad
    --
    Javad Shadzi
    Bay Area, CA

    2-Channel Stereo system in the works with Adcom components and 4-way towers

    Comment


    • #47
      Originally posted by JavadS View Post
      Let's just say when you have 600hp, all wheel drive with a torque sensing center and vectoring rear diff, and can pull 1.5g lateral, the google algorithm is quite easy to beat ;) Javad
      ​600 HP,...What in the world are you driving?

      ​TomZ
      *Veneering curves, seams, using heat-lock iron on method *Trimming veneer & tips *Curved Sides glue-up video
      *Part 2 *Gluing multiple curved laminations of HDF *Cello's Speaker Project Page

      *Building the "Micro-B 2.1 Plate Amplifier -- Part 1 * Part 2 * Part 3 * Part 4 * * Part 5 'Review' * -- Assembly Instructions PDF

      Comment


      • #48
        Originally posted by tomzarbo View Post
        ​600 HP,...What in the world are you driving? ​TomZ
        Hah, hey Tom, since I tune Audis for a living it could be a variety, but take any Audi S4 (2009-2016) with the 300HP 3.0T and throw our bolt on catalog at it (about $5k) and you'll easily be in the 500-600hp range, enough to scramble the algorithm on any of the map apps out there.
        --
        Javad Shadzi
        Bay Area, CA

        2-Channel Stereo system in the works with Adcom components and 4-way towers

        Comment


        • #49
          Glad you guys are ok!

          Comment

          Working...
          X