Announcement

Collapse
No announcement yet.

highest crossover point for Morel 6"?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • highest crossover point for Morel 6"?

    As above, the poly versions.. would 2.6khz be ok?

  • #2
    You'll be into the beaming range at that frequency.

    Comment


    • #3
      Even so- I would think that will be fine. I xover'd at 2.0k for the Supreme, and 2.2-2.3K(IIRC) for the CAW634.
      Wolf
      "Wolf, you shall now be known as "King of the Zip ties." -Pete00t
      "Wolf and speakers equivalent to Picasso and 'Blue'" -dantheman
      "He is a true ambassador for this forum and speaker DIY in general." -Ed Froste
      "We're all in this together, so keep your stick on the ice!" - Red Green aka Steve Smith

      *InDIYana event website*

      Photobucket pages:
      http://photobucket.com/Wolf-Speakers_and_more

      My blog/writeups/thoughts here at PE:
      http://techtalk.parts-express.com/blog.php?u=4102

      Comment


      • #4
        Thanks Skatz, thanks Wolf

        I'm looking at the TIW 634Ft (double ferrite magnet) Hope it performs ok, cant afford the more expensive versions!

        Comment


        • #5
          Here's a polar plot for the Morel TiW 634Ft at 2.6 KHz. Down about 2.25 dB @ 30 degrees and 5 dB at 45 degrees.

          Click image for larger version

Name:	polar plot.JPG
Views:	1
Size:	35.8 KB
ID:	1344315
          "Everything is nothing without a high sound quality." (Sure Electronics)

          Comment


          • #6
            Thank you very much! I'm interpreting from the 30 degree figure that I can just about get away with it. Sent from my SM-G950F using Tapatalk

            Comment

            Working...
            X