Announcement

Collapse
No announcement yet.

Official Grand Rapids Blind Listening Competition - May 19

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Navy Guy
    replied
    Just a friendly reminder that this is coming up soon. Please make sure you have your speakers (at least one) to Mark a week before hand for measurements.

    Leave a comment:


  • xmax
    replied
    I finally responded to a PM, the forum has been acting weird the last few times I tried.

    Also after hearing the driver it's a completely different animal compared to say Tang Band
    paper underhung or SB drivers. It sounds "restricted" above 2K, it could just need more
    break in or I could be wrong. Perhaps something to think about...

    Leave a comment:


  • Ron_E
    replied
    I created the template for the iron driver rebate today. The frame of the driver is not symmetrical. It fits the template perfectly but if you turn the driver 90 degrees it wont fit at all. Fortunately both drivers are the same and there's always an orientation the works.

    Ron

    Leave a comment:


  • xmax
    replied
    Originally posted by ani_101 View Post

    Thanks, this is great.

    how do we get it?
    PM me

    Leave a comment:


  • xmax
    replied
    The cutout and screw hole pattern is the same as the TB W5-1685.

    Leave a comment:


  • ani_101
    replied
    Originally posted by xmax View Post
    Well I made a DXF of the Eclipse if anybody would like it.
    Thanks, this is great.

    how do we get it?

    Leave a comment:


  • xmax
    replied
    Well I made a DXF of the Eclipse if anybody would like it.

    Leave a comment:


  • Navy Guy
    replied
    Originally posted by xmax View Post
    Does anybody have a DXF of the frame for the cutout? If not, I will share mine when I get around to it, unless that is against the rules...
    No rules against that

    Leave a comment:


  • Navy Guy
    replied
    Originally posted by Ron_E View Post
    Do we know how many people have entered the contest? Ron
    Eleven

    Leave a comment:


  • xmax
    replied
    Does anybody have a DXF of the frame for the cutout? If not, I will share mine when I get around to it, unless that is against the rules...

    Leave a comment:


  • Ron_E
    replied
    Do we know how many people have entered the contest?

    Ron

    Leave a comment:


  • ernperkins
    replied
    Thanks for the quick verdict.

    Leave a comment:


  • Navy Guy
    replied
    Yes, use the web price

    Leave a comment:


  • Ron_E
    replied
    I think the Newark web only pricing should be allowed. It's no different than the way PE lists their prices. There's usually a crossed out "list price" with the actual price labeled "your price". If it's on sale it's labeled "sale price".

    Leave a comment:


  • ernperkins
    replied
    I have a driver cost question. I was looking at the Newark (previously MCM) 55-5665 woofer. The Newark site lists the cost as shown in the photo. So is the cost $34.99 or $29.75? I don't know any other way to order them these days other than through the Newark website and the "Web Only" price doesn't appear to be a sale.

    Thanks,
    Ed

    Leave a comment:

Working...
X