Announcement

Collapse
No announcement yet.

Countdown to MWAF...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 4thtry
    replied
    3rd Place, Over $200, Project Name: "Ceramicos" Designers: Javad S. and Jeff B.

    Click image for larger version

Name:	_DS56681.jpg
Views:	4
Size:	172.2 KB
ID:	1382482



    Leave a comment:


  • 4thtry
    replied
    3rd Place, Open Unlimited, Project Name: "The Nirvanas" Designer: Scott M.

    Click image for larger version

Name:	_DS56429.jpg
Views:	3
Size:	209.2 KB
ID:	1382480

    Leave a comment:


  • 4thtry
    replied
    2nd Place, Under $200, Project Name: "Cabaletta" Designer: Paul K.

    Click image for larger version

Name:	_DS56385.jpg
Views:	4
Size:	210.8 KB
ID:	1382477

    Leave a comment:


  • 4thtry
    replied
    2nd Place, Dayton Audio, Project Name: "Kowaxial" Designer: Bill S.

    Click image for larger version

Name:	_DS56358.jpg
Views:	3
Size:	190.4 KB
ID:	1382475

    Leave a comment:


  • 4thtry
    replied
    2nd Place, Over $200, Project Name: "Synergy Horn" Designer: John H.

    Click image for larger version

Name:	_DS56710.jpg
Views:	24
Size:	156.1 KB
ID:	1382473

    Leave a comment:


  • 4thtry
    replied
    2nd Place, Open Unlimited, Project Name: "Reference Mini" Designer: Brian Z.

    Click image for larger version

Name:	_DS56953.jpg
Views:	3
Size:	121.7 KB
ID:	1382471

    Leave a comment:


  • 4thtry
    replied
    Originally posted by craigk View Post

    These were really amazing little speakers
    Thanks, Craig. Enjoyed talking to you again about speakers and photography.

    Leave a comment:


  • 4thtry
    replied
    Originally posted by Squidspeak View Post
    Its amazing that the x-overs are under $200, is there a woofer on the side?
    Yes, in my haste, I selected a picture not showing the woofer. Here is a better pic. Total retail non-sale cost for all drivers was $191. The xovers were roughly $100 each. The two big PP caps on each crossover were roughly half the total xover cost. I thought about substituting much cheaper NPE caps, but I wanted the visual impact of the big caps on the front of my "display" type xover blades. NPE's could probably be substituted with little impact on the sound.

    Click image for larger version  Name:	_DS56320.jpg Views:	1 Size:	193.2 KB ID:	1382467

    Leave a comment:


  • 4thtry
    replied
    Originally posted by GTPlus View Post

    Missed out on hearing these, did these play right after the lunch break?
    Yes, >200 ran from 9am to about 11:15am, break, then Dayton ran from 11:30am to 1PM, lunch from 1-2PM, then <200 ran from about 2PM to 3:30PM. My "Totally flats" were the 2nd speaker played in the <200 category, sometime after 2PM.

    Leave a comment:


  • GTPlus
    replied
    Originally posted by craigk View Post

    These were really amazing little speakers
    Missed out on hearing these, did these play right after the lunch break?

    Leave a comment:


  • craigk
    replied
    Originally posted by 4thtry View Post
    1st Place, Under $200, Project Name: "Totally Flat" Designer: Bill S.

    Click image for larger version

Name:	_DS56830.jpg
Views:	4
Size:	184.2 KB
ID:	1382357
    These were really amazing little speakers

    Leave a comment:


  • Navy Guy
    replied
    Originally posted by Squidspeak View Post
    Its amazing that the x-overs are under $200, is there a woofer on the side?
    They're not. MWAF only requires the drivers to be less than $200.

    Leave a comment:


  • Squidspeak
    replied
    Originally posted by 4thtry View Post
    1st Place, Under $200, Project Name: "Totally Flat" Designer: Bill S.

    Click image for larger version

Name:	_DS56830.jpg
Views:	4
Size:	184.2 KB
ID:	1382357
    Its amazing that the x-overs are under $200, is there a woofer on the side?

    Leave a comment:


  • 4thtry
    replied
    That's all I have time for today. I'll post pics of the 2nd place winners tomorrow.

    Leave a comment:


  • 4thtry
    replied
    1st Place, Under $200, Project Name: "Totally Flat" Designer: Bill S.

    Click image for larger version

Name:	_DS56830.jpg
Views:	4
Size:	184.2 KB
ID:	1382357

    Leave a comment:

Working...
X