No announcement yet.

kab230v3 ground loop hum?

  • Filter
  • Time
  • Show
Clear All
new posts

  • kab230v3 ground loop hum?

    Anybody experiencing this with the Bluetooth active? As soon as the Bluetooth part goes in standby the hum goes away. Doesn’t matter if on power supply, battery or both.

    there isn’t much to ground (power jack, led on aftermarket power switch) but like I said, it’s only when Bluetooth is active.

    Thanks for any ideas, this is a commissioned build. 😕
    Builds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :p