Announcement

Collapse
No announcement yet.

Recommendation for battery source for BT setup

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Recommendation for battery source for BT setup

    Guys, I'm going.to.use my spare DTA-2 amp and would like to connect both battery and DC power, my other KAB board has additional plug and play ability for this but I don't think the DTA-2 has this as the easy option.

    I would like to hear from folks who have done similar if able. I don't know if the battery board for the KAB's has any extra solder points for non KAB boards or is there a simple board one can use to protect over/under charge.

  • #2
    Take a look at the LBB-3
    "A dirty shop is an unsafe shop, if you injure yourself in a clean shop you are just stupid" - Coach Kupchinsky

    The Madeleine
    The Roxster
    Swopes 5.0
    Acoustic Panels
    Living Room Make Over

    Comment


    • #3
      Wow, thanks I can't believe I just looked past this, must of thought it was the KAB without thinking

      Comment

      Working...
      X