Announcement

Collapse
No announcement yet.

Coax nearfield measurement mic placement?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Coax nearfield measurement mic placement?

    So the title says it all. Where do you place the mic when trying to measure the nearfield response of a coax? I'm trying to measure a FaitalPro 8HX150 which has a perforated mesh cover over the mouth of the compression driver. Just eyeballing it I'm going to guess it's a third the diameter of the cone and a third the height of the cone depth.

  • #2
    I guess you mean up to a few hundred Hz? I'd try right outside the tweeter dome, as near the woofer cone as possible.
    Francis

    Comment

    Working...
    X