Announcement

Collapse
No announcement yet.

PE Woofer Selection Guide....

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • PE Woofer Selection Guide....

    For those of you who don't know about it already, the PE Woofer Selection Guide is available at this page: https://www.parts-express.com/resour...election-guide

    Some caution though, some of the drivers listed in the guide no longer exist, and a few others have different parameters than what's quoted in that table, so it looks like the guide uses a different "database" and doesn't pull information for each driver from their page on the PE website.

    Another thing: you can sort by any of the parameters, but it would be nice if you could specify a value range (e.g. 0.2 < Qts < 0.3) and guide would display only those drivers that meet those parameters.
    Brian Steele
    www.diysubwoofers.org

  • #2
    OR, you can cut & paste the data into your own spreadsheet, then sort columns and isolate by "blocks", etc.

    Comment


    • #3
      Originally posted by Chris Roemer View Post
      OR, you can cut & paste the data into your own spreadsheet, then sort columns and isolate by "blocks", etc.
      I've actually done that, but if the information lists drivers that are no longer available, or incorrect parameters for drivers that ARE available...
      Brian Steele
      www.diysubwoofers.org

      Comment

      Working...
      X