Announcement

Collapse
No announcement yet.

Ideas for BT Boombox with a difference....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • djg
    replied
    There's always Velcro.

    Leave a comment:


  • Dukk
    replied
    I am thinking if one surface mounted a screw-mount magnet on the speaker and it socketed into a recess in the main body that had a magnet in the bottom of the recess, that would keep them aligned for maximum strength and also from 'sliding-off' each other.

    Do that x4 and the speakers would click onto the sides of the main body.

    Leave a comment:


  • tomzarbo
    replied
    I agree with Mike,

    Neo is super strong, but they need to be aligned really well. If they're off a bit, they really loose their ability to hold. I had a subwoofer grill that I slightly mis-alligned the neo magnets on and it has always wanted to 'kick-off' with a mild bump because of that.

    You guys have some good ideas going on here by the way. I just wonder how you can keep beach sand out of the thing without keeping it in shrink wrap the whole time. I like the idea of using the hinges as a electrical connection as well; that's ingenius!

    BTW, thanks Brian for making me look up what SWMBO meant.

    TomZ

    Leave a comment:


  • Millstonemike
    replied
    Originally posted by Wolf View Post
    Neo-connectors...
    I'd wondered about how to do that, and now it makes sense. Big Box or PE sell Neo ring magnets. The connector could be either the ring or the center, depending on your methods.

    The french cleat type of speaker hanging system might provide a metal slide system.

    Later,
    Wolf
    What you'll find with the magnets is they hold very strong when pulling them apart. But they'll slide away from each other very easily.

    Click image for larger version

Name:	Magnets.png
Views:	171
Size:	713.5 KB
ID:	1428413

    Leave a comment:


  • mlwebb
    replied
    I used a small plate with a slot on the bottom of each side of the amp, and tabs on the speakers to secure the bottom, and some small latches on the top.
    I decided to keep the 'source' separate, I use a sbc dac combo.
    Click image for larger version

Name:	IMG_20191206_152440.jpg
Views:	219
Size:	408.2 KB
ID:	1428369

    Leave a comment:


  • Millstonemike
    replied
    Originally posted by Brian Steele View Post

    Ooh, I like the idea of the lift off hinges. Using two for each speaker could possibly provide the needed electrical connection needed to the amp as well,if I go with the "leave the cables at home" option.
    That's a good idea, the connection via the hinges.

    I used these latch couplers to hold the lid on my boom box for transport. I needed a fail safe method to hold the cover on. When I tried the hinge approach, they sometimes released during transport. The latches only release when you operate them.

    Either way, get stainless steel for use in the salty beach air.

    Leave a comment:


  • Brian Steele
    replied
    Originally posted by djg View Post
    Hardware: lift off or twist off hinges in front, latches in back.

    lift off hinge at DuckDuckGo
    Ooh, I like the idea of the lift off hinges. Using two for each speaker could possibly provide the needed electrical connection needed to the amp as well,if I go with the "leave the cables at home" option.

    Leave a comment:


  • djg
    replied
    Or hinges in back and neo magnets in front. Might need a grip of some sort to break the magnets apart depending on strength.

    Leave a comment:


  • djg
    replied
    Permanent connections via speaker wire as long as you want them. Out the sides of the main module. To the matching sides of the speakers. Depressions in the sides of the main module for room to stow wires for a flush fit. Cleats in the depressions to wind the wire.

    Hardware: lift off or twist off hinges in front, latches in back.

    lift off hinge at DuckDuckGo

    metal latch at DuckDuckGo

    Leave a comment:


  • Wolf
    replied
    Neo-connectors...
    I'd wondered about how to do that, and now it makes sense. Big Box or PE sell Neo ring magnets. The connector could be either the ring or the center, depending on your methods.

    The french cleat type of speaker hanging system might provide a metal slide system.

    Later,
    Wolf

    Leave a comment:


  • Dukk
    replied
    Super cool idea. Seems so obvious now that you mention it - something with either two or even just one detachable speaker so you can have better area coverage. One could possibly modify a Blast Box or MK Boom for this.

    Maybe consider construction out of plastic. I have been playing with PVC a bit lately and it is easy to work with. You can get 3/4" thick 'boards' up to 10" wide and 12feet long from Lowe's, HD, etc. for very reasonable prices.

    How about using a speakon connector to actually mount the speakers to the main unit? Just plug them right onto each side. Then possibly a compartment in the main body for a pair of 1m cables when they are detached? I have not played much with speakon connectors so I don't know for sure how well they would hold the speakers to the main body - might need some neo magnets to supplement them?

    Leave a comment:


  • Millstonemike
    replied
    Aah beach sand. It gets everywhere. Yes, even there. Ask her.

    I think the first issue is to decide the format: 2.0 or 2.1 boombox. From there, you can select from a number of known, DIY 2-way speaker designs where the finished product has received accolades for it's sound.

    Second issue is power, on several levels. You should stick with 4 own drivers as they get twice the watts out of an amp for a given battery supply voltage. That's why all car drivers are 4 ohms given the standard 12 V auto system. And the battery supply voltage will dictate max power out to the drivers (not the "labeling" on the amp).

    For a 2.1 boom box, Paul Carmody's Isetta design has received many great reviews and there's at least a dozen builds here and on the PE's project gallery to peruse. There's a great 2.1 BT amp available at PE that's commonly paired with the Isetta design. The only issue I see with that design is you'll need a 5S Li-Ion battery pack for a nominal 21 Vs into the amp. PE sells a 5S battery management module (just add 68650 cells (another dissertation purchasing batteries when you get that far). Add a 24 V power brick to charge the unit and to run on wall power when AC is available. Using a 12 V battery will limit output, especially with the Tang Bang W5-1138 woofer's lower sensitivity. An alternative to the Isetta is using the The C-notes or Overnight Sensations with a sub in the center. While those designs are 8 ohms, they'll outplay the single ".1" sub SPL wise (the 2.1 amp's controls will allow volume matching).

    For a 2.0 box, again look to existing 2-way DIY speakers but limit your choices to 4 ohm designs. You can use the same amp, just ignore the ".1" output. Or provide the ".1" output on a connector in the back to connect a passive sub when desired. And my recommendation on needing a higher voltage battery stands as well.

    You'll be limited to BT and 3.5 mm jack as inputs. So without a CD or cassette player, the only openings on the box will be the port(s) for the bass reflex enclosure. Use the box material of your choice, just seal it well with an appropriate water proof finish. Just avoid any woofer with a phase plug with an opening in the center (sand in motor drive).

    A little overkill for your needs but here's my rendition of beach boom box. I love seeing some 500 people standing with hands on hearts when I play the Star Spangled Banner in the morning at 106 dB

    Oh, and make it serviceable. Salty beach air tends to degrade things over time.


    Click image for larger version

Name:	Box.jpg
Views:	267
Size:	119.0 KB
ID:	1428336





    Leave a comment:


  • videsh
    replied
    Steve Meade has a magnetic box terminal, this unit here:
    http://www.wccaraudio.com/1-channel-neo-terminal.html
    I suspect something like this on a smaller scale would not be too difficult to rig up.

    Leave a comment:


  • Brian Steele
    replied
    Originally posted by Wolf View Post
    Honestly, I see Speakons as air and water tight, and obviously the best choice for cabling to the speakers from the central unit if detached.
    Oh, Speakons are great connectors. The main issue I'm seeing with their use here is simply the size of damned things. They will be huge compared to the size of the unit, and especially when compared to the size of the speakers. I'm thinking of going with simple keyed molex connectors instead. They're small and should provide a secure connection.

    I'm looking for the perfect sliders for the job at the moment. "Perfect" would be metal sliders, to ensure maximum electrical contact between the central unit and the speakers, and high durability of course.

    I really want to keep the "2-way" look, so I'm not really considering coaxes at the moment. Implementing a good speaker grille might be a problem though, so I might end up reconsidering that, as it might just be easier to re-purpose the grilles provided with car audio speakers. The speaker boxes are going to be small and sealed, aiming for a Qtc of 1 or higher and hopefully use active HP filtering at Fb.

    Leave a comment:


  • devnull
    replied
    Marine grade plywood to help resist the humidity changes.
    Truck bed liner for protection, It might be kinda thick and textured for sliding the speakers on to the center box.
    Li-ion batteries with charging jack
    A pair of vertically oriented screws for speaker connection. Use a hurricane nut inside the enclosure. Straps, like for biampable speakers, when they are attached. Cables for detached.
    I'd take a look at car and marine speakers, something that's intended for use in a harsher environment. Don't forget coaxials.

    A handle that your significant other can comfortably use. She can carry the boombox while you carry the cooler of beer

    Leave a comment:

Working...
X