Announcement

Collapse
No announcement yet.

BSC Help for Visaton BF37

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3rutu5
    replied
    Originally posted by Chris Roemer View Post
    I left a reply (sort of) in your other BF37 thread.
    Cheers, I replied as well along the lines of I'm a noob and think I understand the electronic BCS

    Leave a comment:


  • Chris Roemer
    replied
    I left a reply (sort of) in your other BF37 thread.

    Leave a comment:


  • fpitas
    replied
    What rpb said, although you usually will need some idea of the baffle size etc., or measure what you get once the driver is in the cabinet and go from there.

    Leave a comment:


  • rpb
    replied
    Usually, a coil in parallel with a resistor, placed in series with the driver will alter the response sufficiently. If you have parts on hand, you could experiment. If I was to guess, I'd say try a .6mH coil, and a 6 ohm resistor to start with, and then experiment from there.

    Leave a comment:


  • 3rutu5
    started a topic BSC Help for Visaton BF37

    BSC Help for Visaton BF37

    I'm assuming something tiny would still benefit a BSC

    https://www.parts-express.com/visato...4-ohm--292-655

    Apart from using an online calculator I don't really know what to do, any assistance would be appreciated.
Working...
X