Announcement

Collapse
No announcement yet.

Cheap 8-inch two-way to try

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    (In Vance's "LDC" he shows tests where) You can add attenuation resistance ahead of filters (amp side), next to the driver(s), in-between filters (on higher-order filters), or even "split" series resistance. By doing so you can often change the "tilt" of a tweeter's response (rising at the top end, or falling).

    The cool thing (w/sim software) is that today you can observe all the "what ifs" very rapidly (w/out even buying any parts), instead of having to build and then test all of the MANY variations.

    Comment

    Working...
    X