Announcement

Collapse
No announcement yet.

Dayton dspb + Kab 2.1 set up

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dayton dspb + Kab 2.1 set up

    Hi everyone, I want to make a 2.1 set up using the dspb100 and Kab-250. I don't always want to use the subwoofer but it seems to me that there isn't a function on the board that can turn of the subwoofer.

    Can I wire the subwoofer to the dspb100 and use a on/off switch between the amp and the speaker so that I can use al the functions of the board (dsp) but turn of the subwoofer if I want. I don't know if this will put some behavior changes to the subwoofer.

    Thanks😁
    Attached Files
Working...
X