Announcement

Collapse
No announcement yet.

last entry of the 3d Printed speakers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Just thought I'd chime in on my experience with the ce65w. I built a couple MT with them, and they are impressive, but do require alot of space given their size. Like most small speakers they sound best when turned up. The last one I did I used a 0.1cf internal volume enclosure for one speaker. I used a 1.2mh inductor, but could even go 1.5. I used .75" pvc, tuned to 80hz. Again, i pared with a tweeter, but if fullrange I'd throw a .8mh or 1mh coil on it. Adequate volume and bass considering.

    Comment


    • #17
      Cheers Jake, I agree with that, I feel even though the graph looks nice and workable at the size I did, I did notice the difference between my test run using a much larger pvc pipe was that sounded better.

      Comment

      Working...
      X