Announcement

Collapse
No announcement yet.

grrr!cantfindit

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • grrr!cantfindit


    I'm looking for a 6 pin 2 channel potentiometer for an mcs 3235 reciever. I've had no luck crossrefrencing this part the # is 021f-100kbx2 can you help me?

  • #2
    Re: grrr!cantfindit

    Provided Link: http://www.allelectronics.com/cgi-bi...DUAL_POT_.html


    > I'm looking for a 6 pin 2 channel
    > potentiometer for an mcs 3235 reciever. I've
    > had no luck crossrefrencing this part the #
    > is 021f-100kbx2 can you help me?

    I'm not sure if this is what you're looking for but here ya go. (Link)

    HTH
    Dan

    Comment


    • #3
      Re: grrr!cantfindit


      Radio Shack sells an alps dual gange pot for less than 5 bucks that is 100K.

      Blair

      Comment


      • #4
        Re: blair


        > Radio Shack sells an alps dual gange pot for
        > less than 5 bucks that is 100K.

        > Blair
        Thanks. I also need to find several color coded resistors. What is the best way to go about this?

        Comment


        • #5
          Re: Dan


          > I'm not sure if this is what you're looking
          > for but here ya go. (Link)

          > HTH
          > Dan
          Thanks. I also need to find several color coded resistors for the same project.I'm novice hobbyist when it comes to this. I was wondering the best way to go about this?

          Comment


          • #6
            Re: blair


            If you have a schematic, just go by the values there. If not, then write down the band colors and look up "how to read resistors" on google and it will explain how to determine values based on the color bands. Some resistors such as Dales do not have color bands, but use #s to tell the values.

            Hope this helps.

            Blair

            Comment

            Working...
            X