Announcement

Collapse
No announcement yet.

Flex Your PCD Mettle:

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Zilch
    replied
    Re: Flex Your PCD Mettle:

    The waveguides you purchase direct through JBL Pro Parts:

    http://www.jblproservice.com/forms/parts_order1.html

    The woofers, they can't sell you direct, so you have to go through a JBL Pro dealer or authorized JBL service center for those. If you do that, you may as well order the waveguides through them, as well.

    Yes, when the B&C woofers get here, I'll run them 2-way, as well....

    Leave a comment:


  • Das
    replied
    Re: Flex Your PCD Mettle:

    Zilch, what is the best avenue to purchase the JBL waveguides and woofers? Don't want to burden them and end up with another QSC 152 scenario.

    Do you plan to test the B&C vs. the 226J in the standard 2-way version as well?

    Leave a comment:


  • Zilch
    replied
    Re: Flex Your PCD Mettle:

    Our better halves hear this stuff more than we do, but DE250 is smoother than the titanium D220Ti, yes....

    Leave a comment:


  • stgdz
    replied
    Re: Flex Your PCD Mettle:

    So I know this has brought up a million times before, the de250 and the 220ti paired with the 152i waveguide.


    Is there an audible difference between the two? They both seem to measure the same looking at the FR graphs but the De250 uses a Polyimide where the 220ti uses a metal diaphram(titanium). I have a selenium 1425 setup with my speakers and some of the highs can be absolutely brutal on the ears (laser shots in star wars the glass breaking at the end of order of the phoenix), it makes me wince a little bit and displeases the better half. The speakers we had before this were some dayton silk domes.


    So am I noticing something that is prevalent with metal CD's or just noticing new effects that the silkies couldn't represent?

    Leave a comment:


  • Zilch
    replied
    Re: Flex Your PCD Mettle:

    Originally posted by Brian Steele View Post
    Sure looks sexy. What's the response look like at the lower end of the spectrum?
    Closed-box cab resonance peak (Fc) is 80 Hz.

    You're gonna have to wait for the PCD files, but those will not show below 200 Hz. Ported, look at the factory spec for AC16....

    Leave a comment:


  • Brian Steele
    replied
    Re: Flex Your PCD Mettle:

    Originally posted by Zilch View Post
    That's a 6.5" woofer, actually (the cab is just 8.5" wide), JBL 226J, available through your JBL Pro dealer or authorized JBL Service Center. $80 MSRP.
    Sure looks sexy. What's the response look like at the lower end of the spectrum?

    Leave a comment:


  • edlafontaine
    replied
    Re: Flex Your PCD Mettle:

    Zilch, keep crankin' 'em out...You Go Big Boy!...that's us back there tryin' to hang onto your shirt-tail :D

    Here's a dream: I'd like to be your shop rat...;)

    Leave a comment:


  • Zilch
    replied
    Re: Flex Your PCD Mettle:

    That's a 6.5" woofer, actually (the cab is just 8.5" wide), JBL 226J, available through your JBL Pro dealer or authorized JBL Service Center. $80 MSRP.

    I have a woodworking pal with a complete shop who's helping me with the baffles. I give him blank baffles (spares are available for all of the Dayton cabs,) driver and waveguide, and a layout, and he comes back with milled baffles ready to load.

    As I demonstrated in the Mini E-Wave thread, mounting flush matters....

    Leave a comment:


  • roymail
    replied
    Re: EconoWave Mini S-6 - First Listen

    Originally posted by Zilch View Post
    Y'all know I don't do "How's it sound?" and I'm certainly not into hype, but in the course of gathering .frd and .zma data last night, I couldn't resist hooking it up to the prototype crossover sitting on the test stand from the previous S-8 builds for a quick listen.

    OH, MAN! The big boys with custom drivers in their arsenal certainly know how to make this happen. I put Celestion CDX1-1731 on the little 6" square waveguide, dialed the L-pad flat within +/- 2.5 dB, and now can't wait to get this little guy into PCD and optimized....

    Zilch, what 8" driver are you using here with the JBL 6" WG and Celestion CD? And, did you rebate those drivers or have it done? Those look great. If they perform well, I'm in.

    Leave a comment:


  • djnagle
    replied
    Re: Flex Your PCD Mettle:

    Thanks Z.

    Leave a comment:


  • Zilch
    replied
    Re: Flex Your PCD Mettle:

    http://www.jblpro.com/catalog/suppor...=231&doctype=3

    Here's the FAT™ study in PCD:

    http://techtalk.parts-express.com/sh...93#post1689993

    Leave a comment:


  • djnagle
    replied
    Re: Flex Your PCD Mettle:

    Originally posted by Zilch View Post
    Your gig, bud. It's a start....
    One of these days, when I have money again, I'll get some measuring equipment, but for now I have to relie on.....you.:D

    Leave a comment:


  • djnagle
    replied
    Re: Flex Your PCD Mettle:

    When I typed in "FATTM" into google, I got Al Yankavitch. What is FAT?

    Leave a comment:


  • Zilch
    replied
    Re: Flex Your PCD Mettle:

    Originally posted by djnagle View Post
    Would you recommend just using the crossover you posted for that WG?
    Your gig, bud. It's a start....

    Leave a comment:


  • djnagle
    replied
    Re: Flex Your PCD Mettle:

    Thanks Z. They might be my main speakers in a couple months. No work for 8 months now and just signed the house back over to the back. We have 6 months to get out. If we end up in an apartment, they will be it.

    Would you recomment just using the crossover you posted for that WG?

    Edit: is there a better WG that you would recommend for that space? I have 7" x 5.25" to work with with no trimming.

    Leave a comment:

Working...
X