Announcement

Collapse
No announcement yet.

How much fun will this be?!?!?!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • martyh
    started a topic How much fun will this be?!?!?!

    How much fun will this be?!?!?!

    Four of these little pretty's arrived today:

    http://www.parts-express.com/pe/show...6-618&FTR=8955

    And two of these little charmers:

    http://www.parts-express.com/pe/show...umber=264-1012

    And all of the little itty bits to help them play nice together. Yay! :D

  • martyh
    replied
    Re: How much fun will this be?!?!?!

    Originally posted by Wolf View Post
    **snicker!**
    Wolf
    Chuckle it up, Junior. Just remember 'He who laughs last is holding the celebratory beer!' (This oh-so-subtle reminder brought to you by the guy still awaiting his justly deserved and fairly won brew from Iowa 2009.)

    Leave a comment:


  • Wolf
    replied
    Re: How much fun will this be?!?!?!

    Originally posted by martyh View Post
    Well, it's "Option B" time, but "Option B" is gonna be good!
    **snicker!**
    Wolf

    Leave a comment:


  • martyh
    replied
    Re: How much fun will this be?!?!?!

    Well, it's "Option B" time, but "Option B" is gonna be good!

    Leave a comment:


  • Wolf
    replied
    Re: How much fun will this be?!?!?!

    Originally posted by keiths View Post
    Your simulation from the 'Fissures' certainly looks like they dig deep. How were they in the mids?
    Hard to tell since the sim was for someone else. I've not built, nor heard them. I would like to someday however....

    Later,
    Wolf

    Leave a comment:


  • keiths
    replied
    Re: How much fun will this be?!?!?!

    Originally posted by Wolf View Post
    Been there....
    Check out the 'Fissures' in my bucket... They dig deep!
    Wolf
    Your simulation from the 'Fissures' certainly looks like they dig deep. How were they in the mids?

    Leave a comment:


  • Wolf
    replied
    Re: How much fun will this be?!?!?!

    Originally posted by Ryan View Post
    I probably would have choosen the RS28F to go with those Ushers! Eitherway I am jealous!
    Been there....
    Check out the 'Fissures' in my bucket... They dig deep!
    Wolf

    Leave a comment:


  • PWR RYD
    replied
    Re: How much fun will this be?!?!?!

    Good to see you back around here Marty. Your new job must be keeping you real busy. Nice drivers!

    Leave a comment:


  • Ryan
    replied
    Re: How much fun will this be?!?!?!

    I probably would have choosen the RS28F to go with those Ushers! Eitherway I am jealous!

    Leave a comment:


  • kmibb
    replied
    Re: How much fun will this be?!?!?!

    The XT25's aren't known for crossing too low, and the Ushers are an 8" woofer with low Fs. Have you considered a dome or small mid to fill in 800-2500Hz?

    EDIT: Might be better to not run the Ushers above 500Hz.
    Last edited by kmibb; 07-21-2011, 04:07 PM.

    Leave a comment:


  • martyh
    replied
    Re: How much fun will this be?!?!?!

    Originally posted by Wolf View Post
    "Proof is in the puddin'!" I thought maybe you had modeled it first... I usually do to get a feel for if it will work or not.

    Later,
    Wolf
    I took Usher's and Vifa's measurements and plugged them in, but it's always better to have actual measurements - hence the assist from my buddy up the road.

    Like mentioned earlier this week...I have options!

    Leave a comment:


  • Wolf
    replied
    Re: How much fun will this be?!?!?!

    Originally posted by martyh View Post
    And btw what puddin' are you looking for, Junior?
    "Proof is in the puddin'!" I thought maybe you had modeled it first... I usually do to get a feel for if it will work or not.

    Later,
    Wolf

    Leave a comment:


  • martyh
    replied
    Re: How much fun will this be?!?!?!

    Quote: Originally Posted by [email protected]

    will this be your first mtm marty?



    He did one for Iowa for his first entry there. TB tweeter and I don't remember the mids. SD215 for bass. HAMMERTIME paint.

    Later,
    Wolf



    But I rebounded nicely the next year!

    In 2008 I did a MTM with a TB 28-847, a couple of RS 125's and the SD215. It sucked like your Gramma's old Hoover. As I have mentioned a few times, 'In a 22 entry competition, it made the Top 21 entries possible!'

    I'll model this up in a MTM and 2.5 but I'm guessing that it'll go as a straight MTM. I'm asking Dirk to measure 'em up and will spend at least 2 months on the enclosures - they're gonna be big, maybe up to 4 cubic feet!

    And btw what puddin' are you looking for, Junior?
    Last edited by martyh; 07-21-2011, 06:43 AM.

    Leave a comment:


  • Wolf
    replied
    Re: How much fun will this be?!?!?!

    Originally posted by [email protected] View Post
    will this be your first mtm marty?
    He did one for Iowa for his first entry there. TB tweeter and I don't remember the mids. SD215 for bass. HAMMERTIME paint.

    Later,
    Wolf

    Leave a comment:


  • arlis_1957@yahoo.com
    replied
    Re: How much fun will this be?!?!?!

    will this be your first mtm marty?

    Leave a comment:

Working...
X