Announcement

Collapse
No announcement yet.

MCM 55-3190 build quality review ($20 cast frame 8")

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: MCM 55-3190 build quality review ($20 cast frame 8")

    http://s187.photobucket.com/albums/x193/ted4412wilt/
    I was tired and got tired again so now I am Re tired.

    Comment


    • #17
      Re: MCM 55-3190 build quality review ($20 cast frame 8")

      Yeah, I was trying to get apples to apples, you were going dollar to dollar
      Facebook | GCF DakotaDIY

      Midwest Audio Club

      RIP Jackson, my big dumb black dog |
      RIP Zoe, my little yellow dog

      Comment


      • #18
        Re: MCM 55-3190 build quality review ($20 cast frame 8")

        Just broke in and measured one unit on LIMP

        Factory specs follows:

        Fs: 35

        Qes: 0.440

        Qms: 1.920

        Qts: 0.358

        Vas: 2.01 cubic feet


        My measured specs:

        Fs: 31.63

        Qes: 0.445

        Qms: 1.906

        Qts: 0.361

        Vas: 2.31 cubic feet

        So, slightly larger box but slightly better extension. Looking real good for a slim floorstanding TMW
        Facebook | GCF DakotaDIY

        Midwest Audio Club

        RIP Jackson, my big dumb black dog |
        RIP Zoe, my little yellow dog

        Comment


        • #19
          Re: MCM 55-3190 build quality review ($20 cast frame 8")

          Originally posted by johnnyrichards View Post
          Looking real good for a slim floorstanding TMW
          There's an audience out there for 3-way systems if you can get the crossovers and drivers to play nice.



          https://www.facebook.com/lowecustomguitar

          www.lowecustomguitars.com

          Comment


          • #20
            Re: MCM 55-3190 build quality review ($20 cast frame 8")

            JR, any more thoughts on the MCM 8"? I am thinking of getting a pair for a TMW's. Box would be 1.1ft3 tuned to 38hz. Or closed box 0.8 ft3, F3=66hz F10=37hz qtc = .707

            Comment


            • #21
              Re: MCM 55-3190 build quality review ($20 cast frame 8")

              Originally posted by ontariomaximus View Post
              JR, any more thoughts on the MCM 8"? I am thinking of getting a pair for a TMW's. Box would be 1.1ft3 tuned to 38hz. Or closed box 0.8 ft3, F3=66hz F10=37hz qtc = .707
              Gots me a couple plans in mind. Both TMW, both pretty different animals.

              One will use that HiVi TM plate that used to be available and the other will use a sealed back cone mid and a 3/4" dome tweeter - all MCM Audio Select drivers. Not enough pure MCM projects out there.

              So yeah, they are queued up
              Facebook | GCF DakotaDIY

              Midwest Audio Club

              RIP Jackson, my big dumb black dog |
              RIP Zoe, my little yellow dog

              Comment

              Working...
              X