Announcement

Collapse
No announcement yet.

New MiniDSP mic

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ejh2854
    replied
    Re: New MiniDSP mic

    I've got one, and have toyed around a little using it with REW... I don't have enough expertise or experience to say whether it's good or bad, but the plug-and-play aspects couldn't be simpler.

    You'll see some concerns raised, you poke around in the miniDSP forums a bit... there've been a few "huh?" moments with cal files, and there's a running (well, sort of) discussion on the actual frequency-range capabilities -vs- how the UMIK-1 was initially advertised.

    Ed

    .

    Leave a comment:


  • ameuba10
    replied
    Re: New MiniDSP mic

    has anyone had the chance to use this yet?

    Leave a comment:


  • benchtester
    replied
    Re: New MiniDSP mic

    A valiant effort, but I would like more than 48 khz sampling for good HD range. I am also concerned that the USB 1.0 might have more latency (but I am open to being enlightened by the gurus).

    Leave a comment:


  • greywarden
    replied
    Re: New MiniDSP mic

    ... and now Dayton has one ;)

    Leave a comment:


  • ernperkins
    replied
    Re: New MiniDSP mic

    The miniDSP mic has a built in DAC which makes it a lor different than the Dayton mic - no external HW is required, just plug the mic into a USB port. The specs (see previous post) look impressive to me for the price.

    Regards....

    Leave a comment:


  • OlderMongrel
    started a topic New MiniDSP mic

    New MiniDSP mic

    http://www.minidsp.com/products/acou...urement/umik-1

    Looks like this is "just a mic" and you use it with REW or whatever. ($75)

    John

    EDIT: I now see the post on a Dayton mic that appears the same functionally, but does not look the same.
    Last edited by OlderMongrel; 12-01-2012, 11:44 PM. Reason: update
Working...
X