How am I supposed to lay all this out?

[Mark65]

Re: How am I supposed to lay all this out?

Well, hell, dude, I'm like five hours away from you. Just bring all your parts out to Phoenix this weekend, we'll build them together. Now Morongo, that's more like Banning, or Whitewater area, right? Or is it Beaumont?

Seriously, though. For the cost of a couple tanks of gas, I'll build them, AND SHOW YOU HOW.


Mark

[xsundown]

Re: How am I supposed to lay all this out?

Crap, forgot the 2ohm resistor in there.

[xsundown]

Re: How am I supposed to lay all this out?

[bkeane1259]

Re: How am I supposed to lay all this out?

I'm in Southern California, Near Palm Springs and Morongo Casino.

Would have helped to know this info earlier. Now you're looking at shipping to the NE coast, when there are SEVERAL people much closer to you.

[WernerM]

Re: How am I supposed to lay all this out?

Well ya beat me to it...

[WernerM]

Re: How am I supposed to lay all this out?

xsundown, what state are you in? You got guys on here offering to help from all over, if any of us are close by, it would save everyone the shipping costs. Oh and I agree about the name change in the reply from Chris, he wasn't telling you to stop asking for help, he was asking you to stop while he seeked help from peepaj.

[xsundown]

Re: How am I supposed to lay all this out?

I'm in Southern California, Near Palm Springs and Morongo Casino.

[xsundown]

Re: How am I supposed to lay all this out?

Oh yeah, by next friday. Not tomorrow lol.

[ROTECH]

Re: How am I supposed to lay all this out?

I'm either going to ship them 1 day shipping or 2 days. Idk if any of you are busy. I'd like to get them back by friday. I'll ship tomorrow.

By my calendar it is Thursday, you meant next Friday right?
Shouldn't be a problem but I'll be shipping back like 3 day mail, not overnight for $35!!!

[bkeane1259]

Re: How am I supposed to lay all this out?

Looks like he busted a 4ohm resistor. Ryan, are you SURE you have a spare 4ohm resistor? LOL.

[bkeane1259]

Re: How am I supposed to lay all this out?

I'm either going to ship them 1 day shipping or 2 days. Idk if any of you are busy. I'd like to get them back by friday. I'll ship tomorrow.

Bud, are you on a rock in the Gulf or something? There might be somebody within driving distance of you. Can't you at least divulge the STATE you're in? Are you in the States??

[ROTECH]

Re: How am I supposed to lay all this out?

PM me for my address.
What is the resistor value you need, I am sure I have it.

Simply ship USPS or UPS, don't use fedex because they are horrible here. It will only take me a day to build and another day to mail them out.

Would you like 1 or both built. No problem either way. If you want to build the second, I will send the second board all laid out and marked/drilled. If I am doing them both I will make em all tight n pretty. If you want to build the 2nd I will make it simpler.

I am offering because learning XO's scared me a few years back and almost drove me from the hobby. And it turns out it is now my favorite part. Easy too!!

[bkeane1259]

Re: How am I supposed to lay all this out?

........compare the two, and decide for your self which is better.

I've seen this happen a couple times, but in reverse. Somebody initially goes with a prefab XO, realizes it sounds like A$$ and then asks for advice on designing a PROPER XO and is floored by the end result.

In this case, the differences would be immediate even to an untrained ear. The shaping in the tweeter network is fairly extensive. Prefab XO networks never take that into account...NEVAH EVAH.

[xsundown]

Re: How am I supposed to lay all this out?

I'm either going to ship them 1 day shipping or 2 days. Idk if any of you are busy. I'd like to get them back by friday. I'll ship tomorrow.

[djg]

Re: How am I supposed to lay all this out?

If you play it right, you can probably get someone to do the whole project for you. All I can think of is drama queen. I can hardly wait until you get to trying to build the cabs.