Announcement

Collapse
No announcement yet.

How am I supposed to lay all this out?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Psycoacoustics
    replied
    Re: How am I supposed to lay all this out?

    Originally posted by bkeane1259 View Post
    Oh no....:eek: A XO Troll? No. Way.
    Bryan,,,,, Thanks, I needed that!

    You guys are AMAZING! The last time I saw people bending over backwards for someone else like you guys are doing I was teaching SCUBA.

    Xsundown,,,,, dig them parts out of the garbage, and send them to someone,,,,, anyone. These people that have tried to help you deserve at least that!

    Than go buy your pre-made xo. By the time it comes in the mail any one of these guys will have it built and on its way back to you! Than you can compare the two, and decide for your self which is better.

    Good luck, Mark

    Leave a comment:


  • bkeane1259
    replied
    Re: How am I supposed to lay all this out?

    So you DIDN'T throw everything out. I was going to request a picture of $80 worth of XO parts in the trash bin amongst food remnants, beer cans, banana peels, etc. THAT would have been cool.

    Leave a comment:


  • bkeane1259
    replied
    Re: How am I supposed to lay all this out?

    Dude. Ryan offered to build them and ship them back to you for free. All that would cost you is one-way shipping. I'm sure he's got probably 100 resistors sitting around too.

    Leave a comment:


  • xsundown
    replied
    Re: How am I supposed to lay all this out?

    I tried again but failed miserably. I think I need to send it to someone lol. How much to put these together? I never shipped anything so how would I get it back? A return to sender prepaid slip? What about that broken resistor? Do you have an extra one? :\

    Leave a comment:


  • Face
    replied
    Re: How am I supposed to lay all this out?

    Originally posted by Soundslike View Post
    It almost seems like you're pulling our collective legs here...
    My first thought.

    Leave a comment:


  • DannyG
    replied
    Re: How am I supposed to lay all this out?

    Where do you live?Maybe someone can come by and help you.Or you can send the parts to one of these guy's who have offerd to help.It would be less expencive than buying pre-built x-overs and sound a whole lot better.

    Leave a comment:


  • bkeane1259
    replied
    Re: How am I supposed to lay all this out?

    Oh no....:eek: A XO Troll? No. Way.

    Leave a comment:


  • Soundslike
    replied
    Re: How am I supposed to lay all this out?

    Hey X,

    If you're seriously this bugged about the whole thing, why don't you reconsider the offers to put the crossover together for you?

    Heck -- I'll do it. That makes about three different offers...

    Or, just leave the project alone for a few days, and see if you don't feel differently then.



    It almost seems like you're pulling our collective legs here...

    Leave a comment:


  • ROTECH
    replied
    Re: How am I supposed to lay all this out?

    Can you pull it from trash and sell to me at a discount?

    Leave a comment:


  • bkeane1259
    replied
    Re: How am I supposed to lay all this out?

    C'mon now...you didn't toss $80 worth of XO parts in the garbage!! The least you could have done was give the coils to the copper scrap collectors....or me. :D

    Leave a comment:


  • xsundown
    replied
    Re: How am I supposed to lay all this out?

    It's all in the trash now. Never doing this again.

    Leave a comment:


  • bkeane1259
    replied
    Re: How am I supposed to lay all this out?

    I'd take that broken resistor and glue a small magnet to it and put it on my fridge as a reminder of your early days in DIY

    Don't worry X - you'll get thru this and you'll be very happy.

    Leave a comment:


  • isaeagle4031
    replied
    Re: How am I supposed to lay all this out?

    Don't give up! Most if not all of us have done that. And all of us have freely the pain and frustration on our first (second, third, fourth, etc, etc) builds. So hang on, you are in God company.

    Leave a comment:


  • peepaj
    replied
    Re: How am I supposed to lay all this out?

    Originally posted by bkeane1259 View Post
    Oh man. Welcome to the wonderful world of DIY.

    Don't throw in the towel man. That lead break on a resistor has happened to everyone at one point especially on the Dayton resistors as their leads are very thin.
    +4 and 1 cap.

    Leave a comment:


  • peepaj
    replied
    Re: How am I supposed to lay all this out?

    PM sent to xsundown.

    Leave a comment:

Working...
X