Announcement

Collapse
No announcement yet.

MLTL for Usher 721

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • MLTL for Usher 721

    I recently picked up a pair of Usher 721 kits very cheap and I wanted to build them into a MLTL tower. Just curious if anyone had done that before and where would the best place to start be?

    Thanks

  • #2
    Re: MLTL for Usher 721

    You need to keep the baffle width the same and the drivers' locations, both horizontally and vertically (from the top) the same in the taller ML-TL cabinet. From there you'd choose a height that would place the tweeter either at ear height or close to it, then model with various depths to see what compromises you need to make in terms of F3/F6/F10, port dimensions and location for optimum system response, as well as port air velocity. I can do some modeling for you if you want.
    Paul

    Originally posted by xsilverjag View Post
    I recently picked up a pair of Usher 721 kits very cheap and I wanted to build them into a MLTL tower. Just curious if anyone had done that before and where would the best place to start be?

    Thanks

    Comment

    Working...
    X