Tech Talk Forum

If this is your first visit, be sure to check out the FAQ. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Topics	Statistics	Last Post
Sticky: Easy ZMA and T/S Parameters Using The LIMP Module in ARTA - An Illustrated Guide by hongrn Started by hongrn, 01-02-2017, 06:11 PM	83 responses 5,527 views 3 likes	Last Post by filmslayer 04-20-2018, 06:51 AM
Sticky: Recommended Test Tracks/Recordings Sticky by mattp Started by mattp, 10-31-2013, 09:04 AM	95 responses 36,292 views 0 likes	Last Post by JRivera 04-06-2018, 02:58 AM
Closed, Sticky: TechTalk Techical Support for Forum by Parts Express Started by Parts Express, 01-20-2017, 08:36 AM	0 responses 535 views 0 likes	Last Post by Parts Express 01-20-2017, 08:36 AM
Sticky: Measured T/S Parameter Thread Sticky by mattp Started by mattp, 11-14-2012, 06:45 PM	21 responses 20,655 views 0 likes	Last Post by Chris Roemer 04-27-2016, 11:08 PM
Sticky: Links to existing DIY speaker designs... by lunchmoney Started by lunchmoney, 06-12-2009, 01:38 PM	128 responses 210,463 views 0 likes	Last Post by SpeakerScott 02-17-2015, 04:14 PM
Closed, Sticky: The Speaker Building Bible by [email protected] Started by [email protected], 08-30-2010, 02:27 PM	61 responses 163,637 views 0 likes	Last Post by [email protected] 05-02-2012, 11:43 AM
NP - Bootsy Funky Friday by Sydney Started by Sydney, 04-20-2018, 07:18 AM	6 responses 123 views 0 likes	Last Post by Sydney 04-20-2018, 01:16 PM
MWAF Registration Open by wogg Started by wogg, 04-16-2018, 12:46 PM	9 responses 142 views 0 likes	Last Post by KEtheredge87 04-20-2018, 09:45 AM
Sorbothane Gaskets ! by thor61 Started by thor61, 07-08-2011, 10:07 AM	19 responses 3,187 views 0 likes	Last Post by Billet 04-19-2018, 09:37 PM
Open and Wide by jclin4 Started by jclin4, 04-09-2012, 08:32 PM	80 responses 17,049 views 0 likes	Last Post by fdieck 04-19-2018, 08:03 PM
3D Printed driver plate by hobbyhands Started by hobbyhands, 04-14-2018, 10:00 PM	17 responses 464 views 0 likes	Last Post by hobbyhands 04-19-2018, 07:47 AM
Moderators, the problem has returned... by Paul K. Started by Paul K., 04-18-2018, 08:55 AM	4 responses 233 views 0 likes	Last Post by � 04-19-2018, 01:50 AM
16Hz RTR Subwoofer From 1979 by Pete Basel Started by Pete Basel, 04-18-2018, 06:45 PM	2 responses 212 views 0 likes	Last Post by Pete Basel 04-18-2018, 09:19 PM
Sunflower Redux Port Tuning by mister_project Started by mister_project, 04-18-2018, 08:31 AM	6 responses 122 views 0 likes	Last Post by cap 04-18-2018, 09:07 PM
Bl question on new Dayton driver TCP115-8 by Dwight Started by Dwight, 04-18-2018, 06:50 PM	1 response 87 views 0 likes	Last Post by Chris Roemer 04-18-2018, 07:53 PM
Hot hide glue veneering---try this guys! by mlau Started by mlau, 04-17-2018, 01:52 PM	6 responses 256 views 0 likes	Last Post by philthien 04-18-2018, 09:31 AM
TCP115-4 desktop speaker by jasonb Started by jasonb, 03-09-2018, 01:04 PM	53 responses 2,483 views 0 likes	Last Post by jasonb 04-18-2018, 12:19 AM
Maple veneer finishing help please by Audiotorium Started by Audiotorium, 04-10-2018, 02:34 PM	17 responses 530 views 0 likes	Last Post by Gordy 04-17-2018, 10:32 PM
What do you do with your old designs? Sell them, let them sit, re-use? by hobbyhands Started by hobbyhands, 04-14-2018, 09:21 PM	18 responses 739 views 0 likes	Last Post by Face 04-17-2018, 08:45 PM
New tool for you veneer guys--Azebiki by mlau Started by mlau, 04-16-2018, 09:29 PM	4 responses 336 views 0 likes	Last Post by AaronBradley 04-17-2018, 07:23 PM
Bedroom Soundbar by jonbourg Started by jonbourg, 04-08-2018, 11:45 PM	1 response 161 views 0 likes	Last Post by jonbourg 04-17-2018, 06:52 PM
Accuton C168-6-990 7" ceramic midrange by captainobvious99 Started by captainobvious99, 12-11-2017, 10:25 AM	76 responses 5,121 views 0 likes	Last Post by bill poster 04-17-2018, 04:04 PM
Classic rock CD musings... by philthien Started by philthien, 04-09-2018, 12:13 AM	52 responses 1,294 views 0 likes	Last Post by Brian Steele 04-17-2018, 12:54 PM
Best crossover point between 400hz and 1000hz? by Music is life Started by Music is life, 04-15-2018, 08:18 AM	22 responses 650 views 0 likes	Last Post by DDF 04-17-2018, 12:28 PM
New Dayton Neo-Pro drivers.. by Wolf Started by Wolf, 04-16-2018, 05:16 AM	4 responses 456 views 0 likes	Last Post by tomzarbo 04-17-2018, 11:20 AM
Have any of you used this driver. Looking to build a small compact speaker. by hobbyhands Started by hobbyhands, 04-16-2018, 05:26 PM	2 responses 214 views 0 likes	Last Post by hobbyhands 04-16-2018, 09:00 PM

Previous 1 2 3 4 5 6 7 8 9 10 11 12 20 Next

No topics found.

Working...

Announcement