Yes, correct. Also, you CAN always ties the grounds together....that's never a problem.

I'm thinking along the lines of how the bandpass curve "looks" ....like a frown. So it would be natural to think that you'd want to do high passing...

Blech....Summer Shandy is nasty. Sorry. Nice braces tho. LOL.

I don't ever recall seeing a three-way topology that didn't have either a resistor or cap first in the bandpass circuit.

You said you used to measure?? Do you still have measurement equipment because I'm sure you'd see a huge rolloff starting somewhere between 1-2k. ...

Correct, it is backwards for a bandpass.

Bwaaaahahahahaha.............. Stogies anyone?

Yeah I just ran the values thru a calculator and it looks like a 2nd order LP around 750Hz and then high pass around 1k -- then add the padding at...

Just looking at that schematic made my ears hurt but then I looked at the drivers being used. Is it possible that the curcuit actually works for...

Looks like she is going to end up on the Ellen DeGeneres show too.....wow. Youtube FTW: https://twitter.com/TheEllenShow/status/337685024847564800

1/2" ply window braces work very well and no helium required.

lol.

Yeah I think DATS defaults to 10k...not sure why since it's usually measured at 1k. Probably doesn't make a difference here though. It is...

Oops I see my exact point was already mentioned. Never mind.

Correct. But......Then there is a THIRD conductor, usually braided shielding that is connected at the source end and not connected at the distant end.

I spy Mirage buyout speaker terminal cups.....FTW!!

I think I got em...is this correct? Re = 5.5737 Fs=41.05 Qts=0.402 Qes=0.44 Qms=4.628 Le=1.323 mH @ 10k mms=27.12 grams

LOL...nice. I've never actually seen anyone mention that they heard a difference flipping those kinds of interconnects around. I have some of...

Just an idea. I have a couple of these cheapy tripods myself. You can get creative with your situation by perhaps mounting the iMM-6 on the end of...

Wow...looks great, especially considering that it's ply. Isn't it fun to fill and sand plywood voids? My last build got me frustrated to the point...

Oh man....I LOVE my router. JR's router is broken right now. Next time you run into him, give him some lovin cuz he's really hurting right...

That's an outstanding cabinet.....really makes me feel like a unskilled wannabe woodworker...thanks for that. :p Seriously tho...I have a noob...

That's a seriously good idea. Then you will have a benchmark by which you can judge your custom speakers. I'd highly suggest trying one of the...

Coming along nicely. Those braces will be very effective since you're hitting all four panels. I always use Gorilla poly glue for braces since I...

Surely you wudn't want to destroy the signature Bose smiley face eq curve?!? Boom, Sizzle... FTW!!!

EFFFFFFFFFFFFFFFFIN AWESOME man!! Big congrats.....welcome back brother.

That's DIY juice my man.....

It's most likely the crappy power supply. I'd call parts express and mention that problem. Make sure your volume on your laptop is at 100% and you...

Sure...understood. Pick up a 3.5mm Y-splitter at Radio Shack.....it's also called a headphone splitter. The Logitech sub already has a cable with a...

Here's an idea.......what sort of sound card do you have? Some have subwoofer outputs. This would allow you to plug your Logitech sub into that...