Announcement

Collapse
No announcement yet.

Visitor message from millstonemike

Collapse

Profile Sidebar

Collapse
Profile Picture
Gordy
  • 66
  • 1

  • Visitor message from Millstonemike

    Millstonemike
    Millstonemike posted a Visitor Message for Gordy
    Hi Gordy,

    Could you perform a test when you receive the new Sure battery module. I need to know if Vcc and Bat + at the J2 and J3 connectors are electrically connected (e.g., 0 ohms). Please test using a DVM (which should read less than 1 ohm). And please test in both directions. That is, switch the DVM leads at the connectors to insure it reads less than 1 ohm in both directions. Finally, also test the GND at both connectors the same way.

  • Gordy
    commented
    I got various readings when I tested them none below 1 ohm I don’t think. I will post pics in the thread as I cannot attach here

  • Gordy
    commented
    You bet. I will test it out when we get back. You know I would be more than happy to send you one to tinker or tear apart.

    GW
  • Leave a comment:

Working...
X