...
Jeff F.
Senior Member
Joined: 02-13-2015
Location: Michigan
-
Yes, the half inch #8 screws from PE work great for rear mounting. I didn't have any go through, without using washers too.
... -
This amp would probably work for what you need https://www.parts-express.com/tps311...100w-with-filt...Leave a comment:
-
Those look cool! They remind me of chrisn's Clockwork speakers
...Leave a comment:
-
Erse sells the 16ga 2.2mH inductor for less than $15. I'm not sure why PE doesn't stock that one....Leave a comment:
-
First off, nice looking build! I bet it's loud! I found a good way to enlarge a subwoofer cutout that's nice and clean. First use a rabbiting bit to increase...
Leave a comment:
-
Thanks, very helpful! I think this will work for me as well....Leave a comment:
-
When you said flat against the I-core, is this what you meant?
...Leave a comment:
-
Inductor layout ok?
I have a very narrow spot for my crossover and was wondering if this orientation would work ok?
... -
Thanks for the reply Mike. I don't plan on powering it with a battery, and Bluetooth doesn't really matter either. I'm mostly just wondering which would...Leave a comment:
-
What 2.1 amp for Isetta build?
I'm trying to decide on what amp would be best for Paul Carmody's Isetta https://sites.google.com/site/undefinition/isetta
I was thinking... -
Leave a comment:
-
It did
Leave a comment:
-
Looks like he's using Audyn Q4 capsLeave a comment:
-
That should work. You can find apps to reduce photo size as well....Leave a comment:
-
Leave a comment:
-
djg, how do you like the MCA amps? I read some reviews complaining about noise issues....Leave a comment:
-
Leave a comment:
-
Also, not sure if you are interested in buying an amp...but this amp has a high pass for the satellites and is pretty stinkin' cheap right now
...Leave a comment:
-
Check out post #236. Scott has modeled a 8ohm Helium xo
http://techtalk.parts-express.com/fo...4062-helium-a-...Leave a comment:
No activity results to display
Leave a comment: