Jake
Midrange Member
Last Activity: Yesterday, 09:33 PM
Joined: 11-08-2017
Location: PA
-
I didn't know there was a Micro farad ll. The originals are pretty impressive.... -
I decided to do the rebuild. Some changes made to the crossover. I chose a higher cross at 5600hz for a little fraction more Bsc. I also went first order...Leave a comment:
-
Nice work dad! The maple pops. Enjoy!Leave a comment:
-
http://techtalk.parts-express.com/member/3901-tomzarbo
Thanks for the kind words Tom. I initially thought I had the nd91 drivers pretty well broken...Leave a comment:
-
Finished the speakers tonight. Hooked them up and noticed something very wrong, I only could hear the highs. Removed the drivers and realized I wired...Last edited by Jake; 03-08-2019, 01:34 PM.Leave a comment:
-
The cossover I point I chose is 4600hz. This was chosen off of what would work, and availability of parts. The highpass is a second order Butterworth...Leave a comment:
-
Leave a comment:
-
Another small speaker build with the nd91
Like alot of us, I decided I wanted to build a small "bang for the buck" speaker. A speaker that sounds larger than its size. I decided to use... -
That thing is a beast sitting next to that klipsch! Nice work, don't sweat the small stuff. I have zero patience when it comes to finishing. Enjoy.Leave a comment:
-
I listen to Pandora daily with the "higher quality" setting. For a free service, I'm quite happy with it.Leave a comment:
-
[QUOTE=chad1376;n1405362]From yesterday:
The broken baffle patched up nicely (what a relief.)
I'm glad that was fixable, don't blame...Leave a comment:
-
That's one heck of an upgrade from the originals!Leave a comment:
-
Beautiful job, and pretty nice crossover components. Dad's lucky😉Leave a comment:
-
[QUOTE=Chris Roemer;n1405100]Don't know if jake is using some kind of online "calculator"
It's simply what Dayton reccommends, and what...Leave a comment:
-
If it's an open back console check out Wild Burro Audio labs....Leave a comment:
-
The nd65-8 utilize .05cf. The 4ohm version requires a little more space of .08cf. I wouldn't go with less space on the 4ohm.Leave a comment:
-
Should be good then. Just remember the 4ohm nd65 requires .08cf internal volume ;)Leave a comment:
-
http://techtalk.parts-express.com/member/67210-3rutu5
For 4ohm, I would go with 0.4-0.6mh and 3-4 ohm resistor.Leave a comment:
-
Another Big Cheap Array - Holes, holes and more holes.
This might be a good source for you.Leave a comment:
-
Either way, you"ll be happy. If you already have the drivers for the minions, why not? You could just build the minions and a separate voxal sub....Leave a comment:
No activity results to display
Leave a comment: