audiojerry
Been Around Awhile
Last Activity: Yesterday, 04:22 PM
Joined: 12-31-2020
Location: Brookfield Wisconsin
-
requiring equipment I don't have, would not know how to use, and would not know how to interpret the results. All I have to go on at my level of inexperience... -
Yes, I used 1/2" acoustic insulation on both sides and back of cabinet, and a loose application of polyester stuffing in the bottom 2 thirds. I did...Leave a comment:
-
I made a couple tweaks. I replaced the 2.4 ohm resistors of the tweeter L-Pads with 5.1's that I had on hand, and I removed about 30% of the stuffing...Leave a comment:
-
I appreciate the link and Paul's explanation, but I don't think it satisfies the reason for my question. I raised the question specifically because of...Leave a comment:
-
What causes an 8 ohm midbass driver operate like a 4 ohm in a speaker?
Is it because of the inductor or trying to match it to the tweeter or ....??? -
Great advice - I'll try both, but it will take a little time to judge results or each....Leave a comment:
-
That is possible, although considering the Amiga's low impedence and sensitivity, I would have expected poor bass response not issues with mid / hi frequencies,...Leave a comment:
-
I believe the xover layout is correct. A different angle shows the 8.2 cap wired to the 2.0 white resistor above and not touching the tweeter circuit....
Leave a comment:
-
Unsatisified with the Sound of My Newly Built Amigas - Options?
I have really been enjoying my new immersion into building speakers as a way of entertaining myself during this period of Covid isolation. Since...
-
Sorry for not replying sooner, guys. I was waiting for a notification but never got one. Thanks for your input.
After finishing the build...Leave a comment:
-
Uh Oh...Leave a comment:
-
I suppose rounding the edges can't hurt. Thanks...Leave a comment:
-
Can you critique this xover?
As a newbie, I think I assembled this P Carmody Amiga crossover correctly according to his plans, but I am not confident. I did connect the drivers and...
-
ok, thanks!Leave a comment:
-
Anothter Port Question
For asthetic reasons I would like to place the port of my Amiga build through the base of the cabinet and add a second base below it separated by a couple... -
now you are just trying to punish me. Ok, I admit it. I'm a punk and a cheapskake.
But if you are still looking, here's another question:...Leave a comment:
-
so, I have to ask myself: "Ok punk, are your ears that sensitive, and would it be worth about 10 bucks for you to find out?"...Leave a comment:
-
I now see what you mean. This is what Paul states about changing to a lower value resistor in his Amiga design:
"It turns out that the...Leave a comment:
-
Maybe I'm wrong, but I thought the resistor in that position was in an l-pad, in which case the tweeter would increase in output as the resistor value...Leave a comment:
-
Would a 2 Ohm resistor in place of a 2.4 Ohm resistor make an audible difference?
I'm assembling Paul Carmody's xover for the Amiga and realized I ordered 2 2 Ohm resistors instead of 2.4 in the filter. I hate the idea of having ...
No activity results to display
Leave a comment: