Well, bass amp for Gumby decided.

[Andy_G]

Agonising, looking at funds, has to be able to fit in IRU space etc. etc

I was considering using a pair of UCD180 Hypex modules, but the cost of them + power supply etc etc etc was looking like coming in around the $400 AUD mark.

So looks like I will end up with a Peak ST-1. 125wrms/side into 4ohms. It is for bass duty only, and will rarely be pushed hard......and the cost is only $230 AUD.
Annoying when that is the overriding decision point... but I see no reason why its shouldn't do the job.

[bogie]

Now, does it have to be _new?_

> Agonising, looking at funds, has to be able
> to fit in IRU space etc. etc

> I was considering using a pair of UCD180
> Hypex modules, but the cost of them + power
> supply etc etc etc was looking like coming
> in around the $400 AUD mark.

> So looks like I will end up with a Peak
> ST-1. 125wrms/side into 4ohms. It is for
> bass duty only, and will rarely be pushed
> hard......and the cost is only $230 AUD.
> Annoying when that is the overriding
> decision point... but I see no reason why
> its shouldn't do the job.

[Andy_G]

> Now, does it have to be _new?_

I checked ebay.au ..no go..

there is a Crown D-75 over there, but i would have to get a step-down transformer, + freight etc..

I mean, 1 RU amps, there aren't that many around !!

[cptomes]

> I checked ebay.au ..no go..

> there is a Crown D-75 over there, but i
> would have to get a step-down transformer, +
> freight etc..

> I mean, 1 RU amps, there aren't that many
> around !!

Carver TFM-6, PM-175, Elan Z series 660 (6x60 or 3x120 when bridged) or the 2 channel variant. Samson had a 1u amp, I think.